UNITED AQUA GROUP 003346F T-STAT MV MECHANICAL United Aqua Group

T-STAT MV MECHANICAL RAYPAK

TSTAT MV MECHANICAL RAYPAK  Supply Pressurized And Nonpressurized Hot And Cold Water To All Faucets From One Outlet  T-STAT MAIN FEATURES: -Heat Pump Up Path Anti-Freeze Protection -3/4" ACCESSORY INLET Size 3/4" Inlet Male Screwed Into Pipe Connections -Manufacturer: Raypak Model: VTMA 12 ZB

RAYPAK's T-STAT MV MECHANICAL, Plumbing Thermostat with Mechanical Dial, White, 4/Carton  is a mechanical dial thermostat designed for use on hydronic baseboard heaters to provide room temperature control. It has a built-in freeze and off position.

With exceptional quality, great performance at an affordable price, the United Aqua Group 003346F T-STAT MV MECHANICAL RAYPAK is sure to be a hit with anyone in the market for a mechanical thermostat.

Raypak's T-Stat Mechanical is a fully proportional thermostat that has a standard 1/2 inch water tube inlet, 4 inch outlet and 8 inch probe. The T-Stat Mechanical can be easily installed by almost anyone. It only requires two wires for connection and can supply up to 800 watts of heating power.

Controlling the temperature of a water heater requires a thermostat that accurately measures and responds to temperature. Replace your rheostat with T-STAT MV mechanical, our newest innovation for your radiant floor system. T-STAT MV is wired in parallel with the existing thermostat and will not require replacing the existing rheostat. T-STAT MV is easy to install, requires no special tools and will not break or burn.

This T-STAT MV replaces and existing mechanical thermostat. It eliminates the need for a C-wire and can be used with any standard humidistat. The product is for use in single stage heat pump systems only. Pacific Energy's T-Stat MV replaces an existing mechanical thermostat on your single stage air to water heat pump system and is compatible with any standard humidistat. It does not require a control wire (C wire). This revolutionary device allows you to set the desired humidity level inside your home rather than adjusting for set point temperature. The T-STAT MV will maintain the humidity level at the

The TSTAT MV-MECH is the first mechanical, self-contained water pressure adjustment unit of its kind. It provides electrical protection and automatic adjustment of water pressure for sprinkler systems using conventional city water pressures of 2 to 70 psi (0.14 to 4.83 bar). Systems operating at high pressures and/or flow rates can cause localized rises in water table levels resulting in excessive seepage and ground water contamination. The TSTAT MV-MECH eliminates this problem.