** OBSOLETE ** LIMIT-RESET MAN ** REPLACED BY 1012
The Limit-Reset Man (LRM) is used to perform dual operation limit-reset testing or limit-reset lockout. The standard LRM with single button is used for performing the dual operation limit-reset test, but can be adapted for lockout use when used with the special 3-button/3-position LRM.
The Limit-Reset Man adjustable limit control is used on most residential furnace. This electrical limit switch prevents furnace burner damage by automatically turning off the burner once the gas valve has reached the machine's limit position and turns it back on when the gas valve moves upwards in its range of motion.
The Amana Furnace Limit-Reset Man switch replaces the limit switch on Model number, L325 (Ignitor model number, C1). It has a lock nut and padlock tab for positive security. It makes a low click when the limit is reached. The Limit Reset Man switch is used in a furnace to signal the pilot or other control circuits when the heat exchanger reaches a preset limit and in turn sends a signal for the furnace to shut off the gas valve.
The AMANA OEM Furnace Limit-Reset Man switch 162335 is a limit switch used on several different furnaces. This switch allows for a furnace motor to automatically shut off when the temperature in your home reaches a set point. When it comes time to replace the original unit, this limit switch is easy to install since it plugs right into your existing wiring connection. You can also change this limit switch out with another model if you have something specific in mind for what you want your heat to do within your home.
The Limit, Reset Man switch is used on an Amana L325 Furnace to prevent the furnace from attempting to restart after a limit fault is detected. A limit fault occurs when a change in temperature or other condition causes the furnace blower to stop. The Limit, Reset Man switch automatically resets when the blower restarts. The Limit, Reset Man switch can be wired using the following instructions:
The L1 limit-reset manual reset limit switch is a 5.7 amp, 240 V ac limit switch. This limit switch is rated for 3/4 hp single phase motors or 1/2 hp and larger frame 3-phase motors. The switch can be used with either slide or rocker style of motor starters. The L1 series can be used with Cast Iron Heat Exchanger Chimneys up to 9" wide x 12" long. They are attached with four
Amana Limit-Reset Manually-Operated Furnace Control Limit Switch; Includes 1 Cyndrical, 1 Lever, 2 Plunger & 2 Aluminum Bushings For The Full Coil