Baldwin 4055033 4055 3-2/5 Inch Solid Brass Base Mounted Door Bumper, Vintage Brass

4055 033 WALL BUMPER

This 4055 033 w/bumpers, solid brass base mounted door bumper is part of Baldwin's complete line of residential and commercial door hardware. Designed to attractively protect walls from chip and finish damage caused by the swing of doors, the bumper is 5" wide and features a classic design consistent with old world craftsmanship. The straight line design provides an attractive appearance that helps coordinate with many door styles, and the rounded profile protects doors from surface damage caused by wall contact without marring or denting the door. Other molded parts such as check stops, kick plates and exit devices are also available to coordinate with these

The Baldwin 4055-033 3-1/2" solid brass wall door bumper in vintage brass is crafted to meet the demands of a busy commercial environment. This wall mounted bumper is designed to prevent damage to walls and trim caused by doors that are repeatedly opened against them. It features a three-screw mounting system, and is available in four antique brass finishes. For more than 120 years, the leaders of the commercial construction industry have chosen Baldwin hardware to protect their projects from costly damage and ensure a smooth opening for new glass and doors.

The Baldwin 4055033 is 3/2-inch solid brass nickel door bumper. The product is 1.5 inches wide and weighs 2.8 ounces. It has a solid brass construction and is sold as a single unit.

The Baldwin 4055033 4055 3-2/5 in. (89 mm) Solid Brass Base Mounted Door Bumper is made from solid brass. It mounts on the wall below the door frame to prevent damage when a door is closed too hard. It is 3-2/5 in. (89 mm) long, and made of solid brass.

Baldwin Hardware's 4055 Mounted Door Bumpers are appropriate for both residential and commercial applications and are supplied as single units.

Wall bumpers prevent damage to doors caused by slamming. They are made from cast brass with a beautiful vintage brass finish.

Protect your walls with our heavy duty brass bumpers. These traditional base mounted door bumpers are designed to hold open doors of cabinets, closets and other residential and commercial applications. Each bumper is equipped with two tension mounts for the best performance when combined with standard door hinges and more advanced pivot hardware or leveling device. We recommend applying a little grease or silicone spray before use to avoid friction and reduce noise as the door closes. These bumpers are designed to be used in pairs on doors that swing opposite one another, but can also be used by themselves if the application requires. Made from solid brass, this base mounted door bumper