RHEEM 177356 -Ruud 70-24071-94 120V 1Stg Inducer Assy W/Gskt

Induced Draft Blower w/Gasket

RHEEM Induced Draft Blower w/Gasket - 57-1526 with 2800 RPM Connection Size: 5/8" x 24 TPI (L3) Inducer Size: 7"; H1; F1, F2, F3, M1, M2 Connection Type: BSPP DPSI; Fan Delay: No; Fan Speeds (RPM): 2200 / 2800; Heat Exchanger Temp Range (F): 50-120 Inducer Material: Copper Inducer Style: Cast Iron

The Ruud ID Fan with Gasket is an induced draft blower that is perfect for use with Ruud or other brand natural gas furnaces. The fan is made of durable steel and has a 6-inch diameter.

The RHEEM induced draft box assembly is a single phase steel inducer blower with an integral gasket. It is available in three sizes and rated 0.25, 0.33, and 0.5 h.p. The estimated horsepower is measured using an industry standard test procedure that reflects a heating load generated by a 35OoF air entering the furnace through the induced draft opening at a given rotational speed of the inducer blower wheel. Air temperature entering the furnace is 21OoF less than ambient temperature. The wattage of this inducer can be approximated by multiplying its measured horsepower times

The Rheem Air Conditioning Inducer Assembly has been designed to fit a variety of furnace models. The list is as follows: RHEEM-80B50N-049A, RHEEM-9331K016A52P3 and many others. This induced draft blower was manufactured in China and is able to handle the following airflow amounts: 1092 CFM at 35°F, 900 CFM at 25°F, 696 CFM at 0°F (wind chill).

Rheem Ruud 70 Series 120V 1Stg Inducer Assy W/Gasket is an easy to install inducer assembly for Rheem and Ruud gas furnace. Measuring 15-5/8" x 18-3/16" x 8" and made of solid sheet copper construction, the Rheem Ruud 70 Series 120V 1Stg Inducer Assy W/Gasket is suitable for use with all air volume controlled and gas furnace models.

The RHEEM 177356 - Ruud 70-24071-94 120V 1Stg Inducer Assy W/Gskt is the right choice for heating professionals. Experience the advantages of working with brand names you know and trust, Ruud and Rheem. Used in residential, commercial and light industrial applications.

Ruud replacement inducer blower assembly features a u-shaped motor and receives 120 volts of power. Blower assembly is designed for use with Ruud water heaters and may be used on selected other makes and models such as Trion: BPT2210,2714,2404,2408,BP242F265B, SP822GRCA; Bryant: PNX75P102SAT12; Rheem: RLG125SA1303N4; Ruud: 10AF098-10BF012; Tempstar: TO120TS2100 APP10415AB