American standard
American Standard ARU101 Flash Shower Rough-in Valve with Universal Inlets and Outlets Unfinished
PB VALVE ROUGH W UNIVERSAL Alfreco's PB Valve Rough-In features the innovative...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountPB VALVE ROUGH W CPVC
The Shower Rough-in Valve with CPVC Inlets and Universal Outlets is for use with American Standard Faucets and other plumbing fixtures. It features a removable adapter for easy installation and screening material preinstalled in the valve for superior noise reduction.
The CPVC Inlet and Universal Outlet Rough-In Valve has four standard inlets for 3/8", 5/8", 1/2" and 3/4" threaded supply lines. The universal inlet features two 1/2" NPSM female threaded connections - one 1/2" NPT female threaded connection - one slip fit connection - one 1/2" NPT male threaded connection - and two 3/4" female universal adapter openings.
The CPVC Rough-In Valve has many features that contribute to its ease of use. Assembly is accomplished by simply connecting the CPVC inlet(s) with the outlet(s). The CPVC inlets can be easily replaced if needed. The CPVC inlets are molded into the outlet and will resist blowouts and provide easy access for any repair. The CPVC inlet/outlet connections are protected from backflow intrusion, yet they will not become restricted even when subject to low pressure or vacuum conditions commonly found at fixtures.
The American Standard ARU109 Rough-In Valve with CPVC Inlets and Universal Outlets is designed to be used with all CPVC 3/8 inlet and outlet pipe. Standard rough.
The American Standard ARU109 Flash Shower Rough-In Valve with Universal Outlets is compatible with all major showerhead manufacturers and has a 12" pop-up drain assembly for easy installation. This rough-in is ready for wall mounting and will coordinate well with any bathroom decor. It has CPVC inlets and universal outlets so it can accommodate multiple shower options.
The ARU109 American Standard CPVC Rough-In Valve is designed for use with CPVC schedule 40 pipe. This unit will provide water to a number of faucets and can be used in either hot or cold applications. It has 3 elbow type vanes, allowing for rotation of 45 degrees each direction and 2 temperature compensating compression springs. Other features include a flush mounted ball-valve cartridge that prevents water from flowing backwards into the water supply and two quick connect fittings, one outlet fitting and one inlet fitting.
Universal outlet valves lay in the floor flange as the tub is being finished. The 1.5" diameter CPVC rough-in pipe allows for more water pressure and consistent heat flow through the wall to the fixtures. These new Universal Inlet/Outlet valves will work with just about any plumbing fixture from electric showers to ceiling mounted steam models.