ATTWOOD MARINE 137104 ANCHOR LIFT SYSTEM

ANCHOR LIFT SYSTEM

Once the rope is folded into the snubber, you can simply couple the system to the shackle and begin to raise or lower your anchor. It's that easy! Features include The ANCHOR LIFT SYSTEM has a larger basket than the other systems on the market, with a unique adjustable gate so you can set it for different size shackles. This gives you a wide range of adjustment so you can use it with 3/8" or 7/16" shackle hangers. It is made from heavy duty steel, coated with polypropylene for weather protection, and features zinc-plated hardware on

The Anchor Lift System places your anchor into an upright position and keeps it off the deck. The stand will not allow the anchor to fall over and is designed to hold up to a 200 lb. anchor. The stand mounts in an area of approximately 2 ft. X 7 in.. STAND ALONE OR CAN BE INSTALLED IN FRONT OF YOUR DECK SEAT FOR EASY ACCESS.

The Anchor Lift System adds convenience and simplicity to dock-side, haul-a-net fishing. Special eye captures your anchor line, allowing you to lift the anchor from your boat without entering the water. Heavy-duty anodized aluminum cleat base features six large mounting holes for easy adjustment, and the stainless steel hook lifts up to 200 lbs. Works with most brands of anchors, including Delta and Danforth.

The Anchor Lift System, manufactured by ATwood Marine , is the perfect solution for anchoring your boat. The unique foundation design offers less bend in anchor line and lifts the anchor off bottom, and out of the way of swimmers or fishing lines. This is accomplished by a uniquely designed pulley which sits inside the hull. A lifting system is attached to a NorthStar top-wind winch to accomplish this as well. The anchor is lifted out of the water by the weight of the anchor line that has been routed through this system. Several hundred pounds of lift can be accomplished with a single NorthStar Top-Wind

The Anchor Lift System from ATWood Marine distributes the weight of your anchors evenly across your bow rail. The Anchor Lift System installs quickly and easily off-the-boat, which means you'll spend more time boating and less time installing.

The Anchor Lift System is designed to raise your boat's outboard motor and anchor to keep the boat out of the water when pulling up on a beach or securing when in shallow water. The system includes two aluminum A-frames, each with an attached pulley wheel, and stainless steel cables. The A-frames have a corrosion-resistant bronze anodized finish and all hardware is included for installation.

The Anchor Lift System allows bow riders to quickly raise and lower the anchor. The kit comes complete with stainless steel hardware, three boat-side straps, four self-sticking lift plates, two tensioners and both heavy duty zinc-plated steel shears and black rubber pads for the deck.