Honeywell 66868 Wall Mount CO2 Sensor, Without Display, 0/2-10Vdc or 0/4-20MA Output

CARBON DIOXIDE SENSOR, WALL MOUNT,

With the Honeywell Wall Mount Carbon Dioxide Sensor, you can monitor CO2 levels with a wall-mountable piece of equipment. It is the ideal solution for applications ranging from greenhouse operations to air purification. The sensor outputs 0/2-10V or 0/4-20mA signals to a control system, and it features a multi-lingual user interface that allows you to communicate easily and quickly.

The 66868 Wall Mount Carbon Dioxide Sensor allows you to monitor levels of CO2 and transmit them wirelessly. This CO2 sensor wall mount features a probe designed to measure CO2 in indoor environments with up to 95% accuracy. Each sensor is calibrated at the factory and verified for accuracy before it ships to you. The unit is fully adjustable and calibrated for ranges of 0/4-20mA, 0/2-10Vdc or 1:1 w/volts DC output,

The 66868 Wall Mount Carbon Dioxide Sensors feature a 10 ft (3 m) long, life-resistant cable and include both a 0/2-10Vdc and 0/4-20mA output. The sensor is factory calibrated to give linear readings from zero to 25,000 parts per million for concentrations up to 30% when used in an air stream of approximately 1,000 ft3/min. They have a temperature range of -40F to 158F (-40C

Designed to be wall mounted with an interconnecting cable, the 66868WBLK Carbon Dioxide Sensor is a cost-effective detector for detecting and measuring elevated levels of carbon dioxide. The sensor's 0-500ppm CO2 range and 2mV/ppm sensitivity allow it to detect CO2 concentrations from diffusing through walls and other nonpermeable materials. This Wall Mount (66868) Carbon Dioxide Wall Mount Sensor is designed to measure CO2 from sources

Wall-mount Carbon Dioxide (CO 2 ) sensor for air quality monitoring, continuous measurement. This standalone model has no integral display included or available, but can be equipped with an optional separately purchased transducer, transmitter, receiver or recorder. It features a ¼” diameter stainless steel probe for medium-temperature applications, and can be installed semi-permanently or permanently in walls, floors or ceilings. Sensing element is attached to a stainless steel housing. Uses 4 AA alk

The Honeywell 66868 Wall Mount Carbon Dioxide Sensor is designed to work as a remote gas concentration monitor providing a key output to an alarm or control system, or for the monitoring of room concentrations in the field. The 66868 can be used without a display by using the 0/2-10 Vdc or 0/4-20 ma output, which is ideal for connection directly to any control circuit.

The Honeywell 66868 is a wall mount CO2 sensor. It is ideal for residential applications and suitable for HNMR, TGR, RWR and WTM series displays. There are no outputs, so if you require an output you will need to use the Model No 66886.  Can be used in the following equipment: *TS-711C, *TS-721C, *TS-821C, *TS-822C, *