CARRIER HN67ZA006 HN67ZA006 TIME DELAY RELAY TIME DELAY RELAY

TIME DELAY RELAY

TIME DELAY RELAY, CODE: 138-4059, TURNS ON AFTER SETTING TIME (eg. Entering number of minutes), AVAILABLE WITH DIFFERENT CODING INTERCONNECTS FOR MAXIMUM CONVENIENCE ================================

The TIME DELAY RELAY, supplied only by the factory, is designed to work in conjunction with the non-delayed motor starter. This relay will delay operation for approximately 20 seconds after the main power has been applied.

The DELAY RELAY is a Time Delay Relay with 10 Seconds delay. It has 2 coil outputs. One of the mode is Delay Mode, the other one is Open Input Mode, which can be set to 7 days ON/7 days OFF/7 Days ON/14 Days OFF by DIP switch on side of the relay.

The product is a Time Delay Relay, the relay outputs are N.O,INSULATED CARRIER HN67ZA006-3

This is a HONEYWELL brand New Time Delay Relay.

Time Delay Relays are used in applications where the relay should not energize until a preset time after an electrical impulse is applied to the coil. These relays are used for all types of time delay applications including lighting time delays, security systems, appliance timing, swimming pool operating logics, transformer tank timers and more. These relays are also called time delay oring relays

The Carrier HN67ZA006 HN67ZA006 Time Delay Relay is a time delay module used to control electrical load.

The Time Delay Relay from Carrier is a time delay device used to operate equipment for a specific period after the main power switch has been turned off. If you have a furnace or air-conditioner that requires back up power, this relay will prevent any electrical damage to the system and it will give you time to exit your home safely. This device can also be used in places like hospitals, manufacturing plants and other large medical facilities, where it's important to evacuate the premises before powering down certain electrical circuits.

The Carrier HN67Z Relay is a time delay relay that is Contact rating of 10A @ 240V AC, Normally Open contact rating of 10A, Delay time of 0.5 seconds to 5 minutes, Lead distance 2 inches., 4000 watts, Ultra micro time delay relay for residential HVAC systems.

The Carrier HN67ZA006 has a type of heating component that uses resistance from warm wires to create power to the element. One terminal is the neutral wire which completes the circuit, and the other side is the hot wire. A time delay relay can either turn on or off a set amount of time after a circuit is closed.

An EO/IRQ graphic symbol with white type machine-printed along the left side of the assembly is exposed through the hole in the front panel. Under the exposed portion of the printed circuit board are three component solder pads. This relay utilizes a magnetic reed switch to detect AC/DC current flow.

COMPONENT CODING INFORMATION: