Copeland 998-0034-01 Stub Tube to Male Rotolock Adapt 3/4 Id X 1-1/4 In-12

"3/4""ID TO 1 1/4 ADAPTER"

In-12 male stub tube to male rotolock adapt 3/4"ID X 1 1/4" Inlet.  ROTOLOCK" is a registered trademark of White-Rogers Corp."

A Stub Tube to Male Rotolock Adapt 3/4"ID to 1 1/4"NC. This adapter is for use on a 998-0070 Series Regulator case. The adaptor provides the connection between the regulator and the end stub when using a rotary union.

Stub tube to male rotolock adapt 3/4 id x 1 1/4 in-12. Helps convert stubs to male rotolock adapt luer lock for checking and bagging.

One Stub Tube to Male Rotolock Adapt 1 1/4"OD x 3/4"ID

In the past, if you needed to take hose from 1-1/4" into a 3/4" inlet or infiltration device, you were left with several options. You could leave the excess hose coiled on the ground or just try and stuff it inside other 90 degree elbows. Not anymore. Now there is only one more option: For use in 3/4" inlet or infiltration devices, that require 1 1/4" nominal diameter hose. Also known as a stub to male rotolock adapter".

Attach a Rotolock stub tube to any 3/4" x 1 1/4" male rod or pipe. Stainless steel construction, assure safe and reliable service.

The Copeland 998-0034-01 Stub Tube Rotolock Adapt 3/4 Id X 1-1/4 In-12 is a stub tube to male rotolock adaptor and comes with a 1 year warranty. It incorporates a 3/4" diameter stub tube with a 90 degree bend and enables the rotolock adaptor to be installed into an existing flow line that has a 3/4" domestic ball valve on the downstream side. It is shipped from Copeland to avoid oversize charges.