Deltana SPE225-10B ENTERPRISES INC 2-1/4 X 2-1/4 EXTENDED LIP STRIKE US10B

2-1/4 X 2-1/4 EXTENDED LIP STRIKE US10B

Our 2-1/4 X 2-1/4 EXTENDED LIP STRIKE US10B is an extended lip strike that is made from corrosion resistant steel.

The Deltana Enterprises INC SPE225-10B (US260) is a 2-1/4 X 2-1/4 inch extended lip strike with a 1-1/8 inch diameter. It has a 10 inch handle and it offers 2-1/4 inches of lip.

The SPE225-10B 2-1/4 x 2-1/4 Extended Lip Strike is one of our standard items. This item can be used with your existing hardware for a variety of doors where a 2-1/4" extended lip strike is required for egress applications or where a regular strike will not work due to the door framing. SPE225-10B comes complete with screws and anchors. The Extended Lips are made from Hardened Steel and the bracket from Aluminum. The actual length of the strike is 9".

The Spe 225 10B mechanical knockout tool is designed for use in controlled striking of the round and extended lip mechanical lock bodies. The striking face has a width of 2-1/4 and an overall length of 4-1/8 . The round corners of the tool minimize the chance of damaging or hitting adjacent structure when striking or withdrawing from a door.

The Strike US10B is very similar to the US8B except that it comes with a lock blade breaker which has a breaker bar for breaking up concrete slabs. The bottom of the handle is also considerably thicker. The main purpose of this tool is to produce a hole in concrete slabs, normally found over sewage drains allowing the sewage to drain into the ground rather then be pumped out. If you are working on new buildings or apartments that have not been finished yet you are likely to have to remove these slabs before installing any utilities, etc.

Self-Drilling, Extended Lip, Galvanized U-10 bolts are used to attach rail to cross member.

The Striker series is made of forged aluminum. The pieces are designed to work with 20, 24 or 27 gauge sheet metal. The pieces are both lightweight and tough for use in your final product.