DiversiTech EC30324 DP Contactor 30A/3P/24V

DP Contactor 30A/3P/24V

The 30 ampere 3 Pole 240-240 V (1) DP Contactor is connected to the load through an angle lug with an arm length of 6 inches. It can actuate magnetically, mechanically, or both at the same time. It may operate by means of a moving coil or moving magnet actuator. The DP Contactor can be used for general switching of resistive, inductive, or capacitive loads in conjunction with DP Holders.

The DP Contactor is a constant duty, single pole, three position device used for over current protection of motors and solenoid valves. It is designed to mount in a standard 35MM DIN rail.

This 3-pole, 30 amp DP contactor is designed for use in the contactor loop of DiversiTech's E series DC pump controllers. The contactor is capable of switching 8 amps at 100% duty.

The DiversiTech® EC30324 DP contactor is a three-phase unit that prepares the generator for easy start and boosts the voltage to the desired level. It automatically disconnects the generator from the power source in case of a short circuit and prevents fires caused by arcing and shorting. The 3P and 24V ratings allow it to be used with generators and solar systems.

The EC30324 DP Contactor is a fast-acting, single-pole, double-throw, solid state Class B control switch designed to prevent reverse current flow in a load circuit. It provides reliable overload protection for devices such as switches or solenoid controlling electric meter movement or other cyclic events. This type of device is designed for use with electronic controls and solid state equipment operating from 24V ac sources. In addition, it offers an adjustable delay off feature to compensate for the slower response of thermal-magnetic devices.

Our Contactor is for use with low voltage, low current devices, where the hot and neutral terminals are connected via a floating relay output. The relay output can operate in two modes: normally open or normally closed. A DP relay is an electromagnetic relay that is operated by the application of direct current. The relay switches in response to changes in direct current flow, which in this case comes from the NLC terminal when the operator manually moves the paddle lever. DP relays are commonly used in control panels for electrically operated devices.

The EC30324 is the next generation of the EC30118 line of DP electrical control contactors. The new features are convenient color coded wiring, lighted rocker switch, and C-face terminal block used in place of many individual terminal screws.

Contactor with insulated enclosure, spade terminals and mounting hardware.

A single-pole, double-throw (SPDT) contactor with built-in overcurrent protection breaker for both poles. It is used to control on/off functions on external electrical equipment.

Setting up a solar electrical system can save you a lot of money on your electricity bills over time, but the connection requires the precise placement of a contactor. The APW-304 is an easy-to-install power contactor that will work with all configurations of photovoltaic panels up to 3,000 watts. It has a superior design with anti-resonant technology built in, as well as a lightning arrestor, and it will connect to an existing circuit panel up to four wire breakers.

Thanks to its rugged plastic housing and stainless steel terminals, EC30324 is still resistant to corrosion even when operated directly in saturated environments. The lockable terminal block and watertight cover make this unit safe and easy to install.

EC30324 is a three-stage AC motor contactor for single or three phase, AC or DC applications.