"2 SPDT 10-30vac/dc120v
This unit can be used in a 3-circuit application, 2 SPDT or 1 SPDT with the isolation and power rating of up to 600vac and 1000vdc. "2 SPDT 10-30vac/dc120v
The RIBMU2C 2 SPDT 10-30VAC/DC120V is the ideal mate to our RIBMUD2C (Reverse Off) double throw photoelectric switch. It features two SPDT (Single Pole, Double Throw) switches that are rated at 10~30vac/dc120v and it has a 1/2 threaded stud for easy mounting. It also has an integrated fiber-optic eye for sensing light levels.
The RIBMU2C is a 2 position, normally open/normally closed 10-30VAC/DC SPDT 60VA Magnetic Low Voltage Relay. Dual Feeding Connectors allow for independent switching of separate Load Devices.
RIMMU2C is a 10-30vdc 2 SPDT Relay Module. This relay module can be driven by relays from 10 to 30VA (max). It features protection against ESD and transient, dielectric strength of 2500VAC for 1 minute.
The RIBMUC series is a night light, illuminator, control circuit for light dimmer, elevator, motor control and compatible with 10-30vac.
The RIBMU2C is a 10-30Vac/DC safety relay with two independent SPDT relays in a single package. Each SPDT relay has an operating voltage of 24Vac/dc; the common terminal is NC when on. This is a heavy-duty safety relay, high quality construction and components. The matched resistor for each coil allows the most flexibility in wiring. This relay has a maximum current rating of 4A, making it an excellent choice for use in device switching applications where switch contact ratings are typically lower than relay ratings.
The RIBM2C Series is a 2 pole, 2 position in line switch. The switch incorporates built-in armature breakers for voltage protection. The switch will operate at AC line voltages ranging from 10 to 30Vac or DC voltages of 20 to 30Vdc and 5 to 60Hz. The common terminal of the switch is grounded."