ELAY PNL 12VDC
GENERAC Relay PNL 12VDC 10A@240VA Part# 0K0103
GENERAC relay PNL 12VDC 10A@240VA Part# 0K0103. Relay mounts into subpanels housing ckt breakers and controls generator field wiring. Also controls generator output connection to transfer switch and provides a dry contact for generator system supervision.
The GENERAC 0K0103 Relay PNL 12VDC 10A@240VA Part# 0K0103 MOV SPDT 120V 60HZ 120VAC DPDT 240V 60HZ is a replacement part suitable for use with the following Generac models:
The Relay PNL 12VDC provides the automatic transfer of incoming PV or grid power to a backup generator in the event of a utility failure.
GENERAC 0K0103 Relay PNL 12VDC 10A@240VA Part#
GENERAC 0K0103 Relay PNL 12VDC 10A@240VA Part# 0K0103. GENERAC OEM PART #: 0KK130, 0KK13B
With Relay products, all mechanical contacts can be isolated, using isolation diode ratings of 450V to 500V. From the neutral of your power distribution center or generator set, pre-insulate all wires with approved CL-3 rated dielectric material. Then connect each phase to a separate terminal on the relay. All coil voltages for these relays are 24VAC/DC except where indicated. The relay coils are low resistance (16 O to 50O), and have current interrupt ratings of 16A@250VAC/60Hz for both coils when operating in the "Make" or "