General Electric 381008 SIGNAL LIGHT;1/2 RED 250V

SIGNAL LIGHT;1/2 RED 250V

Our 381008 SIGNAL LIGHT;1/2 RED 250V is a signal light, whose output can be easily controlled to get just the illumination you need. It utilizes a 1/2 in. diameter lamp and 1/2 in. diameter reflector that creates a continuous beam angle of 10 Degrees. We have included a mounting clamp for easy installation and positioning of the accessory. It has been rated for use from -20 Degrees to 113 Degrees fahrenheit.

This GE 381008 SignaLight® security light is the perfect lighting solution for commercial and residential applications. The 1/2 red 250V bulb provides 29,000 lumens of clear, crisp light. This outdoor fixture resists rust, corrosion, salt spray and other environmental elements. It's suitable for wet or damp locations and offers long lasting durable performance at an affordable price.

This is a Signal Light, 1/2 Inch, Red, 250V

General Electric Signal Light -- 1/2in Diameter; 250V; Constructed of impact resistant polycarbonate and steel; For outdoor use; Red

This GE Signal Light has a classic appearance and is typically used as a caution or warning light. It has a lens and double wall flange and its shape is square. This red bulb has a half intensity and its base is cone shape and made of ceramic. This sign signal light operates at 250 volts and its maximum wattage is 0.0650 watts and the minimum wattage is 0.00000 watts. The diameter of this special light is 2 7/8 inches, the width is 0.625 inches, the length is 0.625 inches, the finish type is clear glass, its U factor is 2.2

This GE signal light is for use with 1/2 in. conduit, and it has a red lens cover molded into the housing. It is UL listed.

The GE 381008 115V 1/2 Horsepower Signal Light illuminates quickly and emits a red glow. This easy-to-use and reliable signal light is small and lightweight enough for hand or machine-guided drilling and can be used to illuminate drilled holes. It comes with a standard plug and operates on 120V power for general lighting applications in residential and commercial buildings.

The Industrial-Grade switch will be used in commercial and industrial applications like garages, workshops, warehouses, marinas, and farms. It has a 1/2'' red high visibility lens. The term "NON-IF" printed on the cover indicates it does not have an isolation transformer.

A GE Lighting signal light provides an optical warning device to enhance the visibility of vehicles, machines and equipment. The signals are supplied with two lenses - red and yellow - for use in different environment conditions

The GE® Big Attic® LED 2G® Emergency Lighting Fixture with automatic 15 minute test capability. Replaces existing flush mounts up to 25 sq.ft. Choose from white, almond, black, or stainless steel finishes. Primary applications include emergency lighting in commercial restrooms, hallways, stairwells, emergency exit doors and elevator lobbies. This fixture must be combined with either Leviton® 15500-Watt Hour BatteryDock® System (sold separately) or the GE Signaling® NF2U-IACS-HV Solid State Nightime Signal Device (sold separately) to

Complete commercial and industrial lighting and electrical service is available from General Electric for more than 100 years. Lighting innovations include the first public address system, patented fluorescent lights, mercury vapor lamps, xenon flash tubes, metal halide lamps and solid state circuitry. In addition to the full line of General Electric commercial and industrial lighting products, GE offers a full range of energy management systems. These combine controls, fire protection, power distribution and high-tech switching systems – everything needed to upgrade or replace existing building equipment – into a single package.

TESTED AND FEDERAL APPROVED