Carrier 316848 24V 45 LB DIRECT COUPLED ACTUATOR

24V 45 LB DIRECT COUPLED ACTUATOR

The Carrier 24V 45 LB DIRECT COUPLED ACTUATOR is a genuine Carrier product. It is designed for use with a Carrier gas furnace. This product weighs approximately 10 lbs.

The Carrier 316848 24V 45 LB DIRECT COUPLED ACTUATOR is a 24 volt direct coupled actuator with grease fitting and has a power consumption of 0.2 amps at 24 volts. With a maximum operating temperature of 176 degrees F, it measures .625 in diameter and 1.5 in length and comes in a black finish. This part has an oil capacity of 0.088 oz., rear bushing, steel screws, metal clutch cover & gear, two collar screws with split washers, spring & detent pin, 2 grease fittings, 2 hex nuts & one instruction sheet.

The Carrier 316848 24V 45 lb Direct Coupled Actuator is a direct coupled gas actuator that can be used in a wide variety of applications, such as HVAC. The direct coupled actuator can be used in applications where there is no shaft deflection and high ambient temperature conditions. The actuation of this product is plain end, meaning the coupling nut can be screwed directly onto the threaded shaft.

The Carrier 316848 40-24V External/Direct Coupled 24 VDC 45 LB External Actuator is a two terminal, bi-directional, direct coupled, spring return, short stroke actuator designed for use with the Carrier 9000™ NVCC.

Exclusive 24 V Direct Coupled actuator operates your garage door and/or opener with ease using the same amount of force that you apply to the control button. This means no more cranking up the weight of your garage door to open or close it.

Get commercial-grade performance on your job site and tackle any subzero weather with a Direct-Coupled Actuator from Carrier. These power-pulsed, series wound compressor pumps provide exacting temperatures and precise pressures for the most demanding HVAC applications in residential, commercial or industrial settings. With all-electric models that eliminate the need for belt drives, lubrication points or maintenance costs, you can get high-humidity cooling and massive freeze protection in an unbelievably compact package.

Direct coupled actuators are designed and built to withstand the impact of frequent reversing and tensioning loads, common in warehouse applications. Applications include: Material handling - Forward/reverse drive belts - Stacker cones - Counterbalance applications where 3-phase units are desired