Honeywell IF-LON2 USB LON INTERFACE

USB LON INTERFACE

The Honeywell IF-LON2 USB LON Interface is designed to be used with the Logix5000, ControlLogix, CompactLogix and Micrologix controllers. The IF-LON2 is compatible with all models of the above controllers. This device supports Ethernet/IP and Modbus/TCP Networking.

The Honeywell IF-LON2 is a single channel USB LON interface. This interface was designed for those who have older Honeywell Vista panels that require the use of an 8 or 10 wire LON network to communicate to their control system. The IF-LON2 will connect directly to their Vista panel and then connect to a PC with no additional wiring required. This interface can be used with multiple networks and multiple Vista panels on the same PC by installing a multi-port USB hub between them and the PC.

Honeywell IF-LON2 USB LON INTERFACE is a device that connects any Honeywell LON sensors. It comes with a cord and a USB adapter. It enables the user to connect to their PC or laptop through the USB port for programming and setup of the LON products. The Honeywell IF-LON2 USB LON INTERFACE is used in conjunction with system software such as LonWorks® Professional or LonWorks® Designer.

The Honeywell IF-LON2 USB LON Interface is a USB to LON converter used to connect an Ethernet (TCP/IP or UDP) device or serial device to a LonWorks® network via a LonMark® Master. It converts an IP or serial signal into the open LON protocol common to all LonWorks devices, making it ideal for applications where Ethernet-based devices must communicate on a pure LonWorks network.

The Honeywell IF-LON2 USB LON Interface is designed as a replacement for the Honeywell IF-LON interface. It allows you to connect the Honeywell LONWORKS system to a PC or Mac via a USB port and provides a simple way of programming and testing I/O devices. The IF-LON2 Interface connects to the LTS2000 or any other device with an IF-LON header, allowing you to program and test all common functions in the same way as with an IF-LON interface.

The Honeywell IF-LON2 USB LON Interfaces provide you with a secure, reliable and cost-effective way to connect your LON network devices to your PC or Mac. IF-LON2 is a simple to use and easy to install solution that gives you full access to your network device’s devices and parameters. They are ideal for HVAC, lighting and security systems, as well as other industrial control equipment.

Honeywell IF-LON2 USB LON INTERFACE is a part of Honeywell series. It's designed for use with the Honeywell LON terminals and addresses needs for remote monitoring and control.

This Honeywell IF-LON2 Interface enables you to use up to 4 LON devices with your PC, such as temperature and humidity sensors, water flow sensors, etc. It is compatible with Windows XP, Vista 32/64 bit, Windows 7 32/64 bit and Windows 8 32/64 bit. It is also compatible with both LON and industrial Ethernet networks.

The Honeywell IF-LON2 is a USB LON interface for the LonWorks® network. The IF-LON2 is a simple device that allows your PC to talk directly to an LNS (Lon Network Server). It connects directly to your PC via USB. The IF-LON2 is supplied with the latest software and drivers, making it easy for you to install and use. This innovative solution makes the IF-LON2 ideal for integrating new control devices into your network, as well as upgrading existing equipment.

Honeywell USB LON Interface If-Lon2 can be used with Honeywell LonTalk® and LonWorks® protocols. The interface provides a way to connect field devices (tags, readers and controllers) to computers via USB port or serial port.