Honeywell VBN2CMSX9200 "1""NPT 2POS N/C 120/240V W/AUX"

"1""NPT 2POS N/C 120/240V W/AUX"

The Honeywell VBN2CMSX9200 1""NPT 2POS N/C 120/240V W/AUX is an Industrial control terminal box designed for use in commercial applications where space is at limited, offering a 2 position 0.14 to 5Amp terminals, a Selective inching mode that provides 0.06 to 4.5Amp terminals overtime, and a manual off function.

The VBN2CMSX9200 1""NPT 2-Position N/C 120/240V Flow Monitor from Honeywell is a control instrument for constructing flow-metering stations. It has the ability to detect and count stable flow in two positions. This meter offers an analog input and output signal. The Analog Output provides 0 to 5 volts proportional to the flow rate with a 4-20 mA analog signal option that can be adjusted up or down through one percent. The VBN2CMSX9200 allows you to visualize of your fluid during operation with its four-digit, 7 mm LED

The 1"" No. 2 Port x 9" Long Y Branch Tee delivers a single line to multiple lines. This method is used for supplying air or gases to multiple devices."

Perfect for applications in which a common or remote on-off control point is required, like irrigation systems, heating and air conditioning (HVAC), or piping for industrial automation. The VBN2CMSX9200 is ideal where only one valve needs to be controlled at a time. It comes with an integrated electromagnetic valve actuator and can operate on 120V or 240V single- or three-phase electrical supplies. It has field selectable switching speeds of 75 to 1,300 reciprocating strokes per minute and offers 2 NO/NC cycles of operation. It also acts as an auxiliary power supply for 24VD

An additional auxiliary output is a popular option for automatic building controls, especially in commercial structures. Providing an output from the transmitter to allow device synchronization, this Honeywell is the perfect component for your home or office.

The VBN2CMSX9200 is ideal for commercial building HVAC applications. The thermostat features a lockable cover to protect internal settings, and is designed for wall installation. The setpoint range is 50 to 80 degrees F, and will send an audible alarm should the setpoint be exceeded.

VANEL® Industries delivers innovative solutions to meet the demands of today's HVACR contractors. Our deep commitment to unrelenting product quality and a strong reputation for service and support has solidified our position as a leading manufacturer of process control products, valves, fittings, instruments, and controls. We also provide an industry leading 1 year warranty on all U.S. manufactured products as well as a 5 year warranty on limited life items such as bearings, bushings, wear plates, heaters, anodized aluminum components and more!