Honeywell VBN2DLPX7200 "1.25""NPT 25Cv 2POS S/R N/C 24V"

"1.25""NPT 25Cv 2POS S/R N/C 24V"

Take advantage of Honeywell's VBN2DLPX7200 "1.25""NPT 25Cv 2POS S/R N/C 24V" 7-day programmable timer. This Honeywell timer can control two 120VAC loads from one Honeywell digital room thermostat, using 6 or 12 amp loops for true travelers. It can be set for any weekday in a seven-day week at anywhere from 0 to 23 hours and 59 minutes of on-time. Each seven-day schedule can be stored in memory and the master settings restored with a master reset button if necessary.

The VBN2DLPX7200 1.25""NPT 25Cv 2POS S/R N/C 24V, from Honeywell, is an item from the "Variable-Speed Blower Motors, fixed speeds" category. The barcode for this product is 231134273822 .

Honeywell's VBN2DLPX7200 1.25" NPT 25Cv 2POS S/R N/C 24V valve inlet is an industrial power control solenoid valve that can be used in a wide range of commercial and industrial applications."

Honeywell's 1.25""NPT Two-Position, Normally Closed, Double-Pole Circuitry Relay provides a time delay that is programmable via time adjust feature. It can be set to hold or change state after a preset interval with the desired t...

The Honeywell VBN2DLPX7200 is a 1 1/4" NPT 2 Hole straight non-critical positive manual proportional Valve Switch with push to reset. The Honeywell VBN2DLPX7200 is 24V AC, Electronic, multi-aperture slide control for proportional control of equipment such as air operated valves and set point temperature systems.

The VBN2DLP series valves are fully magnetic, normally closed, low voltage, 2-position industrial vacuum and pressure switches. Their rugged construction and NEMA 4X rating provide extra protection against harsh environments including the effects of oil, water or other liquids. The VBN2DLP Switches are widely used in a variety of industries such as pneumatic controls, textile weaving machinery controls, web presses jacquard machines, material handling equipment and press braking operations

Designed to be used in Honeywell V2043 applications where a 2-Position connector to the valve's intermediate (703739-2) gas control position is required.