×
Free Shipping @ Any Price
Best Price GUARANTEE
30 days money back
Honeywell VBN2DMPX7100 "1.25""NPT 37Cv 2POS SR N/O 24V"
click to zoom in

Honeywell VBN2DMPX7100 "1.25""NPT 37Cv 2POS SR N/O 24V"

Price: 2099-12-31 $337.05
Free Shipping
In stock
1 days
  • Shopper Award

"1.25""NPT 37Cv 2POS SR N/O 24V"

Honeywell VBN2DMPX7100 "1.25""NPT 37Cv 2POS SR N/O 24V" 1/4"" 37 Cv 2 Position Normally Open 24 Vdc

The Honeywell 1.25""NPT 37Cv 2POS SR N/O 24V is a Duct Pressure Reducing Regulator with an integrated Connector. It is used to reduce the supply pressure and provide air flow control by driving the Ductile Iron metered orifices. It also incorporates two (2) 1/4"" barbed supply inlet ports with pass-through mounting, independent adjustment of both outlet ports, an integral stem seal, a 16 gauge brass body with a 20 gauge swage end attachment, and a process connection of 1.25"" National Pipe Thread (NPT

The Honeywell VBN2DMPX7100 1015T02C is a 1.25"" NPT, 37° F temperature controller with two stage heating, no cooling or power off delay, and 24 VAC / 17.5 VA power supply. This solid state free standing primary controller combines versatility and performance. Continuously monitors temperature utilizing a Pt1000 RTD for highly accurate measurement that is easily programmable from 0-250°F (-20 to 120°C).

The VBN2DMPX7100 controls the flow and shut-off of water to a 1.25" NPT dual male threaded water source. It disables the flow controlled by any single switch that has power applied to it while maintaining flow control from all remaining switches. The VBN2DMP3100 is a two position normally open device that allows normal flow of water through the connected solenoid valve. Disabling action is achieved at the top position of the on-off rocker switch.

Boiler control valve, two-position, normally open (normally closed), 24 VDC, 37 Cv (24 Cv) @ 10 GPM (5.7 L/min) w x 10.15 in H"

The VBN2DMPX7100 2-Position 2-Pole Non-Overload Magnetic Positioner offers a unique solution for coil and motor protection in HVAC applications. With a 1 1/4 in (32 mm) port size, an operating voltage of 24 VAC/VDC and 20 amps at 208 volts this heavy duty magnetic positioner is ideal for motorized dampers and commercial vents such as fresh air intakes, supply storm vents, exhausting grilles, or other ventilating equipment.

Two-position, normally open switch is designed for use where a push-button configuration is required. Switch can be configured at the factory for normally open or normally closed operation by changing poi

1 days
  • Weight: 0.00 LBS
to top