×
Free Shipping @ Any Price
Best Price GUARANTEE
30 days money back
Honeywell VBN2DMPX8102 "1.25""NPT 37Cv 2PO NO 120/240V"
click to zoom in

Honeywell VBN2DMPX8102 "1.25""NPT 37Cv 2PO NO 120/240V"

Price: 2099-12-31 $353.89
Free Shipping
  • Shopper Award

"1.25""NPT 37Cv 2PO NO 120/240V"

The VBN2DMPX8102 is a 1.25"NPT 37Cv 2PO NO 120/240V Pressure Reducing Valve from the Honeywell Thermostatic Series. This valve is of brass construction with a stainless steel disc, and includes two thermal limit switches for automatic operation. This Honeywell VBN2DMPX8102 is a reversing valve that features an 8-point mounting flange and can be used for both gas and steam applications.

The VBN2DMPX8102 NO is a 1.25"" NPT, 37Cv, 2 pole overload protector that operates at 120 or 240V , it protects circuits rated up to 3 Amps and comes with screw terminals for connection.

The VBN2DMPX8102 Fluorescent Ballast operates 2 lamps with electronic ignition. This ballast has a high frequency start, a standard starter cap, 1/4"" & 1/2"" NPT inlets, and class 2 power factor.

The VBN2DMPX8102 is a potentiometer shunt trip unit that senses overloads and short circuits. The unit will trip on overload or short circuit conditions. The output terminals are normally open, but when the electronic tripping circuit is activated, the output terminals are closed. 8 kA short circuit rating with 1N/O 1N/C contact configuration Rated 120/240 VAC at 50/60 Hz voltage 3 wire connection terminal block with leads for power and load Teardrop contact head offers protection against accidental grounding of the output contacts Mechanical interlock details "Stick on" mounting with

The VBN2DMPX8102 is a single stage compressor with cast iron evaporator and scroll compressor. This unit mounts in the same frame as the older 2-stage Unitron and still operates at the same noise level.

The VBN2 from Honeywell is a 240 volt industrial boiler with anti-destruct thermal protection. It utilizes forced air venting and manifold pressure control (resolution: 0.5% of total set value). The boiler

The VBN2.5 Series is a fully programmable, microprocessor-based zoning valve designed for installation in multi-zone commercial HVAC applications. Using smart algorithms and front panel configuration, the zone valve uses digital technology to dynamically control the supply air temperature to prevent over-cooling and save energy. Valve models are available for both with or without reheat for drop ceiling applications. The G2VBN2 valve series also comes with a high performance two stage condenser fan motor for increased motor life and energy efficiency when used in conjunction with ERVs or supply air fans. Using an outdoor reset button, operation

1 days
  • Weight: 0.00 LBS
to top