Honeywell VBN3BJPXA300 "3/4"" 3W 7Cv 2PO SR 24V W/AUX

"3/4"" 3W 7Cv 2PO SR 24V W/AUX

Honeywell VBN3BJPXA300 "3/4"" 3W 7Cv 2PO SR 24V W/AUX . Model VBN3BJPXA300-241. Shipped Weight: 1.25 lbs.

This device has been designed and manufactured in accordance with the latest ANSI 3.1 standards, for auxilary power applications with emergency back-up needs. This specific model is a 3/4" volt 7 circuit, 2 Position On/Off foot pedal switch, 24 Volt Auxiliary Relay Only switch with built-in Auxiliary Alarm Silence, For use with Honeywell's line of QDC900DPI series equipment

The VBN3BJPXA300 is perfect for commercial or residential applications. It features a lensed tritium self-illuminating design in either redon-off, or on when pulled and off when pushed application modes. Features: Lensed Tritium, Non-Glare Amber Lens, 3 Word Markings On Front Side, 2 Word Markings On Rear Side, 63mcd, 1/2W Rating, 24VDC AC/DC SR Element, 7Cv Max Voltage

The VBN3BJPXA300 is a 3/4"" (19mm) Black Tripod Base Non- Explosion Proof Halogen MR16 lamp with dc voltage, contact start, lead wires terminated into lamp socket and an average life of 30 hours.

Honeywell HALMR127 1/2" Drill Master Rotary Hammer - corded, 7.5 amp, 0-1,800/min. - 2-1/8"" flange with socket-ready chuck for better bit visibility and increased strength and durability, 1/4"" keyed chuck fits all standard bits

The VBN3BJPXA300 Wall Box Fan draws fresh air from room to room and exhausts stale air out of the home for increased comfort. The vertical design of this Honeywell fan is ideal in spaces like closets, bathrooms and attics. Three wheel settings with a quiet mode make for smooth operations, while the electronic control panel offers three speeds with push-button controls and mounted thermostat."

If fewer wires is what you want, then look no further. The VBN3BJPXA300 is designed to save on your installation costs by eliminating the need for an additional interconnect cable between the gate operator and the control station. Now there's no need for a separate cable just for interlocking – it all fits in one 6-conductor cable. With connections at each end, you can easily connect this control station up to Wiegand 26 or 34 format contact input devices such as card readers, keypads and proximity readers.