MOTOR, 5.7" 120 VOLT B/B 2 STAGE PERIPHERAL BYPASS
We have the necessary inventory of Lamb L-116336-01 MOTOR, 5.7" 120 VOLT B/B 2 STAGE PERIPHERAL BYPASS to meet all demands of our customers. The Lamb L-116336-01 MOTOR, 5.7" 120 VOLT B/B 2 STAGE PERIPHERAL BYPASS are quality tested and are highly appreciated among young as well as old clients.
The Lamb L-116336-01 MOTOR, 5.7" 120 VOLT B/B 2 STAGE PERIPHERAL BYPASS is a gas powered motor with an air cooled, direct drive, single cylinder, 4 cycle engine. There are a 1/4" shaft and it has a diameter of 17 1/2" with a length of 17 3/4". The clearance distance between the mounting surface and the bottom of the motor is 18 1/2 " and it has 0.437 HP.
Lamb Compressor Corp. L-116336-01 is a motor. Lamb L-116336-01 is designed for use with the 5.7" 120 Volt B/B 2 Stage Peripheral Bypass. This unit comes with a 12" x 3/8" shaft and has dimensions of 4.5 " x 6 " x 2.25 ". It has an open circuit voltage of 150, and a run voltage of 120. This Lamb L-116336-01 has an iprating of 1/11. iw = 3.38 cu in/rev
The L-116336 motor is a direct replacement for the B/B 2 Stage Peripheral Bypass motor. It features a heavy-duty frame with mounting brackets, non-removable end bearing, and shaft. The shaft diameter is 0.75" and has a 2" face-to-face dimension with a 1.5" long mounting hole. It has 2 ball bearing radial & thrust, with an E1 rating, direct drive. Electrical specs are 120VAC / 60Hz and it is supplied with full load current of 3.0 amps at terminal #1, and 1 amp at terminal #
The L-116336-01 is a 5.7" Motor with a 2 stage peripheral bypass (12 VDC and 24/27 VDC). With our diverse product offering of over 4,000 different motors, switches, starters, sensors & related products line card, WEG provides what you need to get your application running
The L-116336-01 Motor is a double pole, single throw, 120VAC, 5.7" by 7" Backward Bypass (B/B) Motor built with hardened steel backiron and windings. This motor has four mounting holes on 1 inch centers with end loops for K-style mounting, and has four keyed shafts held in place with set screws.
A high torque motor with 120 VAC, 60 Hz, 1725 RPM, continuous and 3600 RPM rating for a two stage bypass reciprocating saw. It has a 3/8" arbor with soft start and continuous running brake. SPECIFICATIONS: Number of Poles ................................ 2 RPM ......................................................... 1725 Amp Draw ............................................... 1.5 Shaft Dia. .............................................. 5/8" Frame Size ..................................................................... 5.7" Depth (In.) .................................................. 5-5/16" Case Size (In.) ........................... 4-9/32 x 7-5