PUMP, CP 6-1/2 for Server Products - Part# 83200

PUMP, CP 6-1/2 for Server Products - Part# 83200

This PUMP, CP 6-1/2 for Server Products - Part# 83200 (replaced by part #83203) pumps fully functional and intact, but is missing the cover to the circuit board.

PUMP, CP 6-1/2 for Server Products - Part# 83200

PUMP, CP 6-1/2 for Server Products - 83200

The Pump, CP 6-1/2 (# 83200) is a three-phase pump that features high performance and durability. Its cast iron compensator piston will bring the heat to the boiler and ensure proper flow control for accurate pressures. Guarded meter covers on the discharge outlets prevent entrapment. The pump is designed with simple lightweight construction with inlet and outlet connections at 15 degrees from horizontal. It is capable of flowing up to 28 gpm (91 lpm) and should be used on boilers up to 150 psi (10 bar).

The CP 6-1/2" pump is designed for use with Server Products CP Series Circulator/Chillers. The pump will deliver a flow rate of 4 gpm (15.5 lpm) and a head pressure of 74 ft. (22.6 m).

An evaporative pump, or "centrifugal pump", is the most common type of pump used in air conditioning and refrigeration applications because it works on a simple and effective principle. The CP 6-1/2 is manufactured by Server Products and is commonly found in commercial refrigeration units. It features a good large cast iron volute for lubrication, long wearing carbon steel parts, EPDM gaskets for long life, and a double-wall head to keep the motor housing from getting hot. It has an 8 in. (20 cm) suction line and comes with a 2" flared discharge

The Pump, CP from Server Products makes it easy to start and maintain a liquid hydroponic garden. This water pump has a flow rate of 10 liters per hour and is designed to work continuously for long periods of time.