United Aqua Group 007925F Relay DPST 24 VAC

Pump Relay

This pump relay provides zero flow control with a SPDT switch for sink, shower or other plumbing applications. This 24 VAC relay features two stainless steel screws and features a built-in LED indicator light.

The Relay DPST 24 VAC is a compact pump relay. It is designed for use with submersible or surface-mount pumps. This product is manufactured in the United States of America from imported materials.

This 24-volt water pump Relay operates two pumps at the same time for maximum pumping capability. It has a DPST (double pole, single throw) design with an off position in the center of the control lever for added convenience.

This 24 VAC, non-latching, 3/2 pump relay is ideal for use with pumps, heaters and other process equipment.

Our Aqua Group Relay is a 24-VAC single pump switch that is designed for both tub and shower applications. The flexible design allows the user to select either a Normally Closed (tank to drain) or Normally Open (tank to tank or drain) configuration. Relays with the 24 VAC dual power input option operate on both 12 VDC and 24 VAC power supplies. As always, they meet UL, CSA, ANSI and CE standards for safety and performance

The Aqua-Rite® Relay allows convenient automatic pump control using ABC pumps. Adjustable setpoint alarm allows operator to set a minimum on time that must be satisfied before pump will start and a minimum off time that must be satisfied before pump shuts down. Output relay is SPDT (Single Pole,Dual Throw) rated 24 VAC/VDC 10 amps,@ 30 VA.

The AquaPump Relay is used to switch two pumps on alternate cycles. A normally closed contact is energized for 2 1/2 seconds while the pump fires, then opens and waits 5 seconds for the next cycle. The AquaRelay also has a continuity test that can be used by a controller or timer to monitor the unit