ROBERTSHAW 1830-711 Robertshaw Pilot Electrode Assembly with 3-Way Flame, 13"

"PILOT ELECTRODE

PILOT ELECTRODE

Robertshaw's Pilot Electrode Assemblies are simple-install pilot lights and control switches that fit into the boiler or steam generator flue outlet without requiring any permanent modification. They are specifically designed to fit the space available in most equipment, and feature a strong, lightweight construction.

The Pilot Electrode Assembly with 3-Way Flame is for use with the 8430 Series Pilot Burners. The pilot flame is designed to ignite the burners in a preheated oven. With the pilot electrode assembly you can also utilize a separate electrical ignition device. The electrode and hard wire flame will be independent of any burner up to 4 inches (102 mm) in diameter."

The ROBERTSHAW 1830-711 Pilot Electrode Assembly with 3-Way Flame, 13" helps to control burners on a natural gas or propane barbecue grill. It is compatible with select models, including the Arizona and California grills. This pilot electrode assembly comes equipped with an integral mounting bracket for easy installation. It features a stainless steel shell and a brass casing. Designed for outdoor use, this reliable pilot electrode assembly is covered by a limited lifetime warranty from ROBERTSHAW."

Robertshaw Pilot Electrode Assembly with 3-way flame pattern. Replacement for units: 1830-061, 1830-071, 1830-111, 1830-131, and 1830-141. Fits the following models: 7650, 7800 S/B, and 7800 R/B. Meets or exceeds all IEEE std. 52901 requirements."

The Pilot Electrode Assembly with 3-Way Flame is a replacement pilot assembly for your gas water heater. It has a manual reset and an adjustable pilot that provides a flame that adjusts from 2,500 BTU to 7,000 BTU. This burner assembly makes it easy for you to regulate the flame and maximize efficiency."

This pilot electrode assembly is used as a replacement for older style, factory installed pilot electrodes and come with everything needed to connect to the gas valve. This corrosion-resistant ignitor kit is rated at 24 volts at 21KW, includes 3-way flame tip gas valve, large metal grate, pilot electrode assembly tip, exhaust pipe with cap and ground wire