United Electric 24-013/M262 24-013 M262 Delta Pro Differential Pressure Switch Buna N Diaphragm (96162)

1-10# D SWITCH W/BUENA DIAPH

Delta Pro 1 to 10 pound Differential Pressure Switch with Buna N Diaphragm and back mount installation # 96161

There are two switches available for the Z-130 Separator: The M262 (not shown) or the W-115. The M262 comes with a BUNA N diaphragm one-way check valve, and it replaces the 24-013/W-115 switch. In all other aspects, these switches are identical.

Delta Pro is the newest product from United Electric. Delta Pro is a one-piece Buna diaphragm switch that can be installed in the area most prone to fluid incursion. The rigid plastic body makes it resistant to scratches and abrasions. It has an internal relief that resists high differential pressures. The switch is extremely durable, vibration resistant, and easy to install. Applications include: HVAC/R; pumps; centrifugal units including fans; and any application where a non-

An adjustable pressure switch for a wide variety of applications, including pneumatic system monitoring, gas line leak detection and motorized valves. Features and Benefits: Differential Pressure - Measures the difference in pressure applied to two chambers. Switch - Activates upon reaching the set Range/Differential/Differential Range 0-30 Inches of Water Diaphragm - Offers different packing materials such as corrugated paper or neoprene rubber\u003cbr /\u003e

Designed with the professional installer in mind, these switches use the sealed switch technique for optimum reliability. Buna N diaphragm washer provides leak proof seal and a long service life for this measurement application. Switch is AC actuated – available in 24 Vdc, 120 VAC single-phase or 120/240 VAC three-phase voltage options.

UL NOM. 3-Pole 24 VAC 60 Hz 9 A SPDT o+o+o Contact -Non-Flammable Diaphragm Buna N Body Only 96162

The United Electric 24-013/M262 is a Delta Pro Neutral Pressure Switch with an integral Buna N diaphragm. It is used in HVAC systems to control the blower airflow to a single coil. The switch consists of an adjustable linkage that con- nects the front setscrew to a CSW diaphragm rossing through a LUEG spring and into the internal operating arm. The two pressure chambers are con- nected by the V-