Viking Electronics RG-4 Viking 1 Line Ring Shaper and Booster.

1 Line Ring Shaper/Booster

The RG-4 is a 1 line ring shaper/booster with protected "speaker tap" screw terminals, and a double pole safety switch.

Viking Electronics RG-4 is a 1 line ring shaper/booster that handles up to 4 GPM. It has a built-in stop/start delay timer, and the automatic on/off switch and flow control valve make it easy to activate and adjust the machine. Its 24V motor has three times the power of an 18V motor to give this unit versatility for more than one project.

The Viking RG-4 is a 1 line ring shaper/booster. It provides lightning protection for up to 30 pairs of Type ACO (Aluminum Conductor, Optical) fiber optic cables. It also incorporates an output circuit breaker to minimize the downtime and repair cost associated with lightning or power surges. The Viking RG-4 protection system is ideally used to protect short haul interconnect trunk cable runs as well as unit-to - building-to – unit installations.

The RG-4 Viking 1 Line Ring Shaper and Booster simultaneously boosts and shapes single loop or multi-loop reverse polarity video and allows the installer to convert a standard coax cable distribution system to handle Reverse Polarity as well as to boost the signals for long cable runs.

Make an immediate positive impact on voice quality! The Viking-1 Ring Shaper/Booster instantly restores the clarity of your voice and improves your overall intelligibility when making phone calls, and is a cost effective, easy to install solution for both VoIP and standard analog phone systems.

This shaper/booster is suitable for VDSL/ADSL systems, cable and radiolink systems. It has 4 ports RING IN/OUT ports for multiple shaping or line amplifier applications. The RG-4 has a POE output to power your DSLAM or other equipment.

The Viking RG-4 is a two-wire installation ring shaper with a line injection point for boosting main and extension telephone lines. The unit reduces local loop impedance and increases the overall line length. It provides up to 1 Amp of boost current to ensure adequate protection against loop impedance and line attenuation. The Wolverine RG-4 may be installed on every telephone line in the home, thus providing improved telephone system performance and connection reliability.