Zurn F1960 Expansion CR Multi-Port Tee – Flow-Thru EX PEX Mains 3/4x 3/4, (6) 1/2 EX PEX Opposed Outlets QEPMFO4436

Zurn F1960 Expansion CR Multi-Port Tee – Flow-Thru EX PEX Mains 3/4x 3/4, (6) 1/2 EX PEX Opposed Outlets

The Wilkins® 2-600XLHR lead-free pressure reducing valve has a rated flow of up to 600 gpm and a maximum pressure of 125 psi. It features a lead-free brass body, stem, bonnet and seat. The valve is designed for use with cold potable water or high pressure systems, such as steam distribution systems. It can be used in combination with noncorrosive gases having a maximum wet bulb temperature of 120°F (49°C) or less.

Wilkins Pressure Reducing Valve: The Wilkins 2-600XLHR high pressure reducing valve has a maximum working pressure of 125 psi and a maximum temperature of 100°F. The valve is non-handed and designed for the control of water, steam, gases and air. Manufactured in the U.S., this valve is lead free, with an FNPT union x FNPT. A set pressure between 85-125 psi is adjustable on the C face port, with a flow rate up to 1 GPM at 85 psi set pressure.

Union 75-125 psi, lead-free, FNPT union x FNPT, Hi pressure 75-125 psi, Set 85 psi.

Wilkins Pressure Reducing Valve is required to reduce water pressure for applications such as a drinking fountain, or when connecting to a potable water source when installing a gravity-fed system such as a cooler or refrigerator water supply. The Zurn Wilkins Pressure Reducing Valve meets all applicable NSF/ANSI 61 requirements and is made of lead-free brass. The Zurn Wilkins Valve combines value and performance with industry leading innovations to provide high quality products that exceed customer expectations. The result is the most comprehensive line of brass valves, fittings and accessories for the plumbing, heating, cooling, renewable energy and HVAC markets.

The ZURN 2-600XLHR is a Wilkins type pressure reducing valve with a set point 85 psi. It has Hi pressure 75-125 psi and connection size of FNPT Union x FNPT. It comes with a CIP stackable bracket.

The optimal choice in pressure reducing valves. The Wilkins® 2-600XLHR Pressure Reducing Valve is designed to provide the highest level of performance and reliability available anywhere. It is compatible with water systems requiring pressures up to 125 psi, and can reduce incoming water pressure to as low as 5 psi throughout the complete flow range.

Zurn’s largest lead-free pressure reducing valve. The 2-600XLHR has a flow range of 0.0 to 10 gpm and is capable of reducing water pressure from 75 to 125 psi, set at 85 psi. For water applications where lead-free plumbing materials and lead-free solder are required by code, the 2-600XLHR is your best choice in the industry.

The Wilkins pressure reducing valve (PRV) can provide a gentle, controlled flow of water for showers or to fill a bath with less water and less waste. The Wilkins PRV is a quality tested valve that is built to last. Install this PRV in the line between the main shut-off valve and your shower, bathtub or any other plumbing fixture that you want to be controlled by a PRV. The PRV diverts some of the incoming water at higher pressure through check valves and into an accumulator tank. The reduced pressure is then used to control the flow into your plumbing fixture.

The Wilkins 2-600XLHR Low Lead, High Pressure Reducing Valve is designed to reduce the high pressure of water from municipal or well sources. The 2-600XLHR is a pressure reducing valve with a port size of 1/2” FNPT and it reduces water pressure from 75-125 psi to 0.85 psi. The valve has Hi Pressure and Lo Pressure settings that are controlled by a single handle and can be rotated 360 degrees.

This lead-free pressure reducing valve is used to convert high pressure water supply to desired lower pressure. The cast iron body ensures durability and long lasting service life. It is used in domestic and commercial applications like residential housing, hospitals etc.