Schneider Electric {Erie} 0453L0077G Direct Drive ACTUATOR 120VAC REPLAC

Direct Drive ACTUATOR 120VAC REPLAC

The Schneider Electric {Erie} 0453L0077G Direct Drive ACTUATOR 120VAC REPLAC is a solid state replacement, and simply replaces the old actuator when no replacement is available. This unit has no field wiring or field connections associated with it so there is nothing to be done after install. This item comes with a one year warranty.

The Erie 0453L0077G ACTUATOR 120VAC STANDARD PHASE OEM replacement drive operating at 120VAC 60Hz should be used with 4805S or 4448 valves to operate hot water baseboard heaters. This replacement actuator can also be used on 4640-L8-15C and 4630-P9-15C linesets. You can use this ACTUATOR 120VAC to replace your existing damaged or malfunctioning parts.

The Schneider Erie/New York Direct Drive™ ACTUATOR is designed for use in 120 VAC installations. The direct drive ACTUATOR features a quick disconnect feature with a key lock to prevent tampering. The 120 VAC Schneider Electric Erie/New York Direct Drive™ ACTUATOR is also UL and CSA listed.

The 0453L0077G ACTUATOR is a direct drive actuator with a straight lever arm. This actuator is 120VAC rated and must be used with 0453LX673 manifolds. The Actuator comes complete with hardware needed for operation and is one of the most common replacement parts.

The Erie 0453L0077G direct drive actuator allows you to receive full use of your motor by eliminating the gearbox from the drive train. This direct drive 120VAC, 12/60/1CY max. NEMA 4X actuator is typically used for high-cycle applications such as industrial power control, marine controls and refrigeration or HVAC controls where a low-speed stepper motor is required.

The ERIE Series of general purpose direct drive actuators give you the power and energy efficiency to handle almost any application. Each direct drive actuator in this series is compatible with the companion COMFORT, INTEGRITY or COMMANDE remotes giving you a wide array of control options and greater comfort with integrated diagnostics and easy set-up. The ERIE Series is an industrial Grade unit designed to last and meet the demands of your application from harsh environments to 24/7/365 service. They are ideal for doors, gates, illumination, traffic barriers, lifts, hoists and many other applications.

Erie 0453L0077G direct drive actuator. Length 5 15/16 inches. Height 11/32 inches. Width 1 3/4 inches. Handle 16 3/16 inches (center to center). Actuator should have "AC88" stamped on the square plate attached to the head of actuator and "D" stamped on rod end of passive rod. The wire connections on the top of the mounting plate are yellow and green stripped with a red cap (