Raw Materials

Special film to be overlaid on adhesive just after it has been applied. Prevents air entrapment when adhesive is condensed and contoured into the repair area. Also allows for non-messy spreading of the adhesive.

The B & S ANODES377-BSMSET0153 BOW THRUSTER ZINC VETUS BP 129 is a set of three zinc vetuses that are designed to be used with the B & S ANODES377-BSMSET0153 BOW THRUSTER. The zinc vetuses are designed to help increase the power and accuracy of your bow...

The BEST WELDS 900-1167G 1/16X7 GROUND PURE TUNGSTEN is a pure tungsten wire for use in electric guitars and basses. It is a heavy gauge wire that is perfect for bass strings and low end guitars.

This is a zinc anode for a Honda motorcycle. It is made of zinc and is designed to help protect the battery from corrosion.

This is a 8x4x3/4 inch hull plate made of zinc. It is used to protect the hull of a boat from damage.

OutdoorAirTempSensor1097ohmsThe Honeywell T775 series 2000 controllers offers performance and value in a line of over-temperature limit controllers. This 1097 ohm at 77F PTC Outdoor Air Temperature Sensor is for use with the T775 Line only , the 1097 ohm...

TEMP CONTROL PROPORTIONAL 160-260FThe Honeywell T991A1061 Control Temperature Proportional 135Ohm 160/260F 5ft Capillary 3/30 Adj Dif is a special order item. It may take up to 3 weeks for delivery.The Honeywell T991A1061 Control Temperature Proportional...

The Jet 825-440303 SJTB-3/4 3/4X36 SCREWJACK TURNING BAR is a turning bar that is designed to help you turn screws quickly and easily. This bar is made from durable steel and is designed to fit most screwdrivers.

This is a joint strip for the Pitco A1900104-C. This strip is used to connect the top and bottom of the fence.

The martyr anodes 194-CM06411ZV5Z are zinc small bars designed for Honda small bars 35-5C. These anodes are made of zinc and are designed to help protect your motorcycle from electrical shorts.

This Martyr Anodes 194-CM290KITA Volvo 290 Anode Set Aluminum is a great way to keep your vehicle running smoothly. This anode set comes with a set of four anodes and is made of durable aluminum. This anode set is a great way to keep your Volvo 290...

The Volvo/OMC SX Gimbal Plate is a replacement part for the Volvo/OMC SX Gimbals. This plate is designed to provide increased stability and accuracy when filming or photographing with your Volvo/OMC SX camera.

The Martyr Anodes194-CM431708Z zinc omc curved block is designed to provide superior performance and reliability when it comes to anodes. This anode is made from zinc and is curved to provide a more efficient connection with the battery.

The martyr anodes 194-CM55989A are made of aluminum and areButton-shaped. They are designed to fit into the anode compartment of a battery and provide an extra layer of protection against battery failure.

The Martyr Anodes194-CM55989Z Merc Zn Gimbal Bolt Head is a replacement part for your Merc Zn Gimbal. This bolt head is made of high-quality Merc Zn and is designed to fit your Merc Zn Gimbal perfectly.