Baldwin 0532004 0532 004 HALF SPINDLE 3.375 BROACHED

0532 004 HALF SPINDLE 3.375 BROACHED

The Baldwin® 0532004 0532 004 HALF SPINDLE 3.375 BROACHED is a solid carbide broach. This broach has an outside diameter of 5/8" and a length of 3-1/4".

Baldwin 0532004 0532 004 HALF SPINDLE 3.375 BROACHED

The Baldwin 532-004 0532004 Half Spindle 3.375 - Holds 3/8" to 1" stock (Larger image of tool pictured is 4x more detailed view of the BALDWIN 0532004 HALF SPINDLE 3.375 BROACHED)

The cutting edge that fits on the multi-spindle broach machines: HALF SPINDLE 3.375 BROACHED

The 0532 004 half spindle broached bore can machine shafts to a diameter from .200 to .250 and an OD from .330 to .450 and operate on the lathe at speeds up 25,000 RPM.

This Half Spindle 3.375 Broached is a spindle having two hardened steel cutting edges parallel to each other and ground to a perpendicular lead angle. The half spindles have ADF of 4.37° with TIR of .003? maximum, depth of mouth .750? – 1.125?, length of lands at the bottom of the mouth is .457? minimum and .500? maximum, shoulder diameter is .453? minimum and .500? maximum, length of shank is 2.98? long. It weighs 4 pounds and ships via UPS or FedEx Ground

"This half spindle (0532004) is a Baldwin spindle that has been broached and turned on a lathe. It has a 3-1/4" diameter x 12-1/4" length. This spindle is normally used with our 5 ton, 10 ton, 15 ton and 20 ton log splitter models. Our log splitters require two of these spindles to function properly. Specifications for all of our Baldwin spindles can be found below"- BALDWIN