ASCO 8210G022 120/60 110/50 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz, 110V/

1-1/2 X 1-1/4 2NC BRASS 6.1/FT

The ASCO 8210G022 relay valve can be used to automate control of a single solenoid. This two-way normally closed (2NC) brass valve features a 1.1" pipe size for compatibility with existing piping systems. With a maximum flow of 22.3 cubic feet per minute, this pilot operated relay valve is ideal for commercial and residential water pressure applications. Additionally, it offers an orifice size of 1.1".

The ASCO 8210G022 solenoid valve is normally closed, pilot operated, with brass body and support. Pilot operates with a 5 watt coil, maximum current draw 0.09 amps. The pilot is rated for a voltage range of 110-120 VAC, 66-74 VDC. The maximum flow rate, or specification number 22.5, has a 1-1/4" pipe size with a 1-1/2" orifice.

This Brass Pilot Operated General-Service Solenoid Valve is ideal for residential, commercial and industrial applications looking for 1.1/2 In. orifice size for a full body - 120/60, 110/50 and 120/60 . It is constructed with brass body, 1-1/2 Inch pipe size.

This valve takes a pilot signal of up to 30V AC @ 160mA. It has an orifice size of 1-1/4". The pilot output and normally closed ports are both rated 22.5 Cv. It has a flow rate of 6.1 GPM at a pressure of 180 PSI and a temperature of 40 degrees Fahrenheit. This valve allows for flow in two directions with one signal.

The ASCO 8210G Series is a pilot operated, normally closed solenoid valve rated for water service. This solenoid valve features NBR Butylene seals. It has a 2" (51mm) NPT pipe size, 1-1/2" (38mm) orifice size, 22.5 Cv flow rating, and 1-1/4"[32mm] NPT male inlet with deck fitting connection.

We feature these valves in our inventory because we wanted to highlight a few of their features. For example, the description we included about being a pilot operated valve is a benefit to some users, but others will want to know that the body is bronze.

The ASCO 8210C General Service Solenoid Valve is a pilot operated, normally closed, 1-1/2" pipe, 2-way solenoid valve that provides 22.5 cfm @ 0 psi for Nitrile and Butylene liquids. Six foot long cable and 10 foot lead wires.