1-1/2 X 1-1/4 2NO BRASS 16.1/F
Our 8210 series pilot operated general service solenoid valves are capable of operating at very low pressures. They contain a vented pilot assembly that is completely enclosed and hermetically sealed by the valve body. These 1½ × 1¼ 2NO brass valves feature a diaphragm and trim style bonnet. They are usually installed vertically into the process, however they can be mounted horizontally with the supplied base gasket and bracket. This model is two-way normally open, with a 1-1/4" orifice. SO8210G032 120/60 -120/60 Brass Body Pilot Oper
The ASCO 8210G032 120/60 -120/60 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Open, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz is a pilot operated solenoid valve. This ASCO 8210G032 model normally open brass body pilot operated switch rated to 16.1 lfpm at 100 psi and 50 degF has an NBR nitrile butylene seal with a 1-1/
The ASCO 8210G032 120/60 -120/60 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Open, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz is used wherever precise and repeatable control is required. It offers a unique design with wide on-off ranges and superior operating characteristics to provide reliable valve action in any position.
ASCO 8210G032 120/60 -120/60 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Open, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz
The 8210G032 model G solenoid valve features a 1-1/2 inch pipe size, 22.5 Cv flow, 2-way normally open configuration with a 0.80 inch orifice, and a brass body. It uses nitrile butylene packing.
This ASCO 8210G032 1-1/2" solenoid valve is for commercial applications. It has a 2-way normally open configuration, a 1-1/4" orifice, and is rated for 120/60/120 voltage. The maximum flow rate this solenoid valve has been tested for is 22.5 cubic feet per minute (Cv). This pilot operated control valve meets UL and CSA requirements.
Make sure that you always have a reliable source of water, using the ASCO 8210G032 Pilot Operated General Service Solenoid Valve. This 120 volt solenoid valve has a temperature rating of 0 to 200 degrees Fahrenheit and has a solenoid coil voltage of 120 volts, 60 Hz. Also furnished with an orifice size of 1-1/4", this valve is considered UL Listed and CSA Certified to meet all requirements for quality and performance.