Johnson Controls V246GE1-001C Water Regulating Valve, 2 Way, 1-1/4 In

1.25"npt Hi#WtRegVlv200-400#DA

This Johnson Controls valve is designed for controlling water flow for gas and oil fired heating systems. It features a 1-1/4" npt inlet and outlet, 200-400

Water Regulating Valve, 2 Way, 1-1/4 In.

What is a water regulating valve? A water regulating valve is used to maintain the pressure of a fluid within a specified range by controlling the amount of fluid allowed to pass. The Johnson Controls V246GE1-001C Water Regulating Valve, 2 Way, 1-1/4 In, contains hard chrome seatings and 1/2 inch FNPT female pass ports with gauge ports, wetted as well as floating bonnet, 1.25 inch FNPT male inlet port with locking cap and 6 inch Stainless Steel tailpiece with 1.25 inch FNPT female outlet port.

This valve is a replacement part manufactured by Johnson Controls. It performs the same function as the original equipment (OE) part but has been designed with a replacement specific design. This valve measures 1.25 Inch Outlet, 1.0 Inch Inlet, and is made of brass.

The Johnson Controls V246GE1-001C Water Regulating Valve, 2 Way, 1-1/4 In is a water regulating valve with a 1-1/4 inch connection that makes it durable and long lasting. With its right ball valve design, this water regulating valve provides a quick shut off in the case of an emergency.

Johnson Controls is a globally recognized leader in water management. This high quality water regulating valve is designed to save money for the consumer by preventing over-heated water from going into the tank, and adjusting flow to meet varying demands. The Johnson Controls V246GE1-001C Water Regulating Valve has a brass body, cast iron field control, nylon packing, and chrome plated bonnet.

This Johnson Controls water regulating valve, 2-way, 1-1/4 in, is designed for use with any heating and cooling equipment and system. This Johnson Controls water regulating valve, 3-way, 1-1/4 in, is made of durable materials with a high quality finish that withstands harsh weather conditions. This Johnson Controls water regulating valve, 2 way, 1-1/4 in comes with a limited warranty that protects against defects in workmanship and materials.

Keep your spa water exactly where you want it with this 2-way Johnson Controls water regulating valve. It features a durable brass construction that stands up to the high temperatures in your hot tub, while the EPDM diaphragm and tethered stem prevent damage from messy chemicals. The pressure bleed on this two-way valve lets out trapped air that can pull water from your spa when you turn it off, and a polypropylene handle makes turning it easy.

This Johnson Controls V246GE1-001C water regulating valve operates in both the domestic and non-domestic applications, the highest service temperature can be 225 F (110C). The maximum water pressure of this Johnson Controls water regulating valve is 1.0 Mpa(10MPa= 145psi), the maximum working pressure of this Johnson Controls water regulating valve is 0.6Mpa(6MPa=85psi)

This Johnson Controls V246GE1-001C pressure reducing valve is designed for use with hot and cold water domestic systems. It is a 2 way, 100 psig, water limiting valve that is used to reduce the pressure of hot and cold water systems in order to provide flow rates within desired limits. It helps to ensure a safe and efficient flow temperature.

Ships on 02/21/2016