OTC OTC-7497A 1-3/8" SNGL REAR AXLE BRNG PLR.

Rear Axle Bearing Puller

It features a hard steel construction with a plastic grip handle for added comfort

The large handle offers a firm grip, and the large pads are used for applying pressure evenly

This means that you can work with less effort and over a longer period of time

Simply place the puller over the ring gear and align the holes with the pinion shaft

The differential bearing puller has a left hand thread for use on right hand threads only

Drive the pinion nut off utilizing a 3/8” drive socket wrench or breaker bar

If you need to remove or install tapered roller bearings in differentials, gearboxes or other heavy machinery, then this is the perfect tool for you

1 in) shaft and has a usable length of 35 mm (

It has a 12-point star drive and is made of steel with a zinc finish

The Differential Bearing Puller is used to remove the pinion shaft from the differential end of the axle assembly

Great for removing bearings from both differential carriers as well as other applications where the tool needs to be inserted into a tight space

The OTC OTC-1028 Differential Bearing Puller is a professional quality tool designed to remove a differential assembly from an automobile

Diagnostic repair procedures require extremely accurate removal and installation of gears

The tool is extremely durable and can be used time and time again

The OTC® Differential Bearing Puller is designed to remove bearings from their holding tubes in ring & pinion sets, differential carrier assemblies and transfer case units

1028

The center sleeve on each arm accepts a pinion stub shaft, allowing the bearing to be drawn directly out of the carrier casing

The OTC-1028 has a 28 mm (1

The OTC Differential Bearing Puller makes changing your differential bearings easy

OTC Differential Bearing Puller OTC-1028

The puller has a removable jaw that will fit either inside or outside of the puller body

5 lbs

This differential bearing puller is the ideal tool to use when removing or installing tapered roller bearings

The OTC Differential Bearing Puller is used for removing both internal and external differential bearings, whether damaged or worn

14 in)

The puller set consists of two precision-ground tool steel arms, which engage the bearing rings from either side

Weight: 2

The OTC Differential Bearing Puller is an easy to use tool that can be used with a standard 3/8 drive socket wrench or breaker bar

The OTC-1028 puller works in both directions and has the ability to remove bearings with or without the carrier bearings installed

This tool is constructed of heat-treated S2 steel with a black phosphate finish for long life

It features two hardened steel hooks with plastic inserts to protect the axle housing, two rotating handles to keep your hands safely away from the bearing, and an adjustable handle which can be positioned at any angle through 360 degrees

This listing is for a differential bearing puller

This OTC Differential Bearing Puller is a must-have tool for any DIYer with a garage and a car