Reznor 133157 - AUTO RESET LIMIT 60T11-313154

AUTO RESET LIMIT 60T11-313154

The BECKHOFF 133157 is a single pole, 3 position switch having one AUTO RESET LIMIT. This BECKHOFF 133157 has a normally open contact rating at 23 amps at 240 volts and a voltage rating of 600 volts. The BECKHOFF 133157 is a UL Certified device which was made from the highest quality components available offering great economy and reliability in applications where space is limited, demand is high and equipment cost is critical.

AUTO RESET LIMIT W/HP3.PINS<128>1-100.T<45>·70±150MS

The Reznor Auto-Reset Limit Switch detects the presence of liquid transition from full to empty, and indicates the Water Level in your tank. This level switch may be used to control hot water heaters and other applications where a preset level is desired. The high quality stainless steel construction unit is designed for use with both LP (propane) and Natural Gas. This limit switch can push button style probe can be adjusted for optimum accuracy.

The EZ Reznor Auto-reset limiter is just the right addition to your compressor. With a built in wire tuck feature, your lines will be organized and you will have no problems accessing and installing the device.

The Reznor 133157 is a Limit for HVAC Systems supplied with mounting hardware and instructions. The Limit is 120 VAC, 3 wire terminal connection with a 15 Amp current capacity, 480 Volt Power Rating, capillary tube type mercury thermostat. It is normally closed and has a 1/8" quick disconnect mounting tab.

The limit control is a dual 60 amp 2 pole reset thermal limit control designed to protect motors and equipment from burn-out. This rugged, oversize, control has an epoxy sealed enclosure and is manufactured with heavy-duty case for trouble free installation. A self contained pushbuttonswitchactuated overload releases the contacts to permit automatic reset after shutdown in case of overload. The extra large illuminated ammeter helps indicate a possible overload condition and allows you to accurately determine the amount of load being asked of the motor or secondary device.

The Reznor 133157 limit switch is for use in a variety of applications including commercial applications. This standard duty switch has a volt rating of 120v/277v and has a wattage capacity of 1000W.