HEIL QUAKER / ICP 1050699 1050699 CONTACTOR 1P 25A 24V S

CONTACTOR 1P 25A 24V S

The HEIL QUAKER / ICP 1050699 1050699 CONTACTOR 1P 25A 24V S is made from high quality materials, it's durable and easy to use. The HEIL QUAKER / ICP 1050699 1050699 CONTACTOR 1P 25A 24V S will give you a lot of conveniences while offer you long service life. With reliable quality and stable performance - this product is Good choice for you!

The ICP 1050699 1050699 1 pole 25A OCPD (i.e. Normally Open Push-Pull Direct Acting) fuse/circuit breaker contactors for use at 415 V AC and below is ideal for applications requiring high short circuit holding current combined with low inrush current. It will switch ungrounded currents up to 12A at 250V AC and 20A at 125V AC. This low cost, easy to install, high quality three phase contactor has a projecting stud (bore diameter 16 mm) which makes the unit suitable for panel mounting or box mounting using the fixing points at either

The HEIL ICP 1050699 contactor is designed to control supply power of the AC motor. This contactor is supplied complete with frame. The contactor is suitable for use with ICP motors and comes complete with an integral terminal box.

The QK1CON has a single pair of screw-type terminals. The contactor is operated from a signal source with built-in voltage limiting. A terminal block provides wiring connections to the coil side of the contacts. A DIRECT CONTACTS terminal block provides direct connection to the contacts with no external wiring. The ICP1050699 has an operating voltage range of 90–305 V ac, and a nominal contact current of 1A.

The HEIL Quaker ICP 1050699 1050699 is a type of contactor that has two coils and two sets of contacts. These are typically used for 240V domestic mains applications.

ICP has been designing and manufacturing innovative products for 30 years. We are a global company specializing in contactor, communication, control and system integration. Our registered trade mark of "iControlPad" will make you avoid duplication when you are choosing the solution of HMI, PLC or just operator device which only provide the place for operation but not really operate for your application. ICP will be your reliable partner to design and develop your innovative project.

The ICP 1050699 is a solid state analog output, single phase AC contactor with built-in magnetic trip, designed for use on electronically controlled single phase motor starters.