HEIL QUAKER / ICP 1054586 1054586 BLOWER MOTOR 1/230 1.0 HP SINGLE PH

BLOWER MOTOR 1/230 1.0 HP SINGLE PH

HEIL Part Number: 1054586, ICP Part Number: 1054586, IC Part Number: 1054586. Blower Motor 1/230 1.0 HP Single Ph

The Heil Quaker/ICP 1054586 Blower Motor 1/230 1.0 HP single phase, is suitable for use on a variety of equipment in commercial and industrial settings, including furnaces, boilers, and air handlers. This unit is specifically designed for induced draft blowers.

The replacement blower motor for Heil quaker model 1054586. 1/230 and 1.0 HP single phase with a 6 ft. power cord, wire size 14 gauge, 24 VDC 85 C RMS, NEMA frame T1-T2. ICP part number 0147-1054586.

The motor is 1/230 HP, single phase, TENV . The frame size is B 14-1/4 X 15-1/2 X 5-7 inch. The shaft size is 5/8 inch diameter. It includes a motor running capacitor.

The Quaker blower motor operates at 1/230 h.p. and 115 volts and has an approximate RPM of 1200 and a flux linkage of 8. The blower has a 1/2 inch shaft hole with a shear pin installed. Contains Commutator yoke assembly, Ring set and bearings, Field assembly, Timing device, Drive shaft, Shaft tensioner spring, Fiber washers for fiberglass pole applications. Use this motor in most blowers designed for the following: 4-way arrow control; air-powered forklift / articulated lift truck; air-powered forklift; air-powered

The 1/230 HP variable speed blower motor has a voltage rating of 115/230. The capacitor is rated at 400 volts and 60 Hertz. The motor can start at speeds from 4,200 to 59,000 RPM and operates at 7,300 RPM maximum.

The Blower Motor is a blower motor for products, with a rated voltage of 230.0V.