Baldwin 1083260I 1083 260 I STEEPLE TIP FOR RADIUS CORNER HINGE (2/SET)

1083 260 I STEEPLE TIP FOR RADIUS CORNER HINGE (2/SET)

The Baldwin 1083260I 1083 260 I SteePLE tip for Radius Corner Hinge (2/set) is the perfect solution to replace those missing or broken corners. With its patented, adjustment lock mechanism, our outside spindle allows for perfect installation on your radius hinge. The built in pin keeps the adjustment lock secure in place. Just snap the spindle into place and you are ready to install a new radius corner on your gate, door or window design.

The Baldwin 1083 260 I Steeple Tip for Radius Corner Hinge (2/Set) adds the finishing touch to the outside corner of your radius door. It is designed to work with hinges up to 67 inches long, and will only work with radius doors.

If you need to make a miter joint that is in a radius corner. The Baldwins Hinge 1083 260I has the answer. This hinge is 10 1/2 inches tall and has two 3 inch STEEPLE TIP for RADIUS CORNER HINGE (2/SET).

These Baldwin Radius Corner Steeples are designed for use on wood jambs. With a long installation reach, you can hook them around the jamb, and then tighten the screw with the attached grub screw. This ensures that they will not come loose over time. Available in a wide variety of finishes, including white and oil rubbed bronze, these steeples are ideal for most homes.

Designed to allow the further extension of the see-through radius corner hinge.

Baldwin's radius corner hinge mortise locks are used to secure mounting plates for the family of Baldwin radius corner hinges.

Baldwin Radius Corner Hinges fit the corner of your fireplace screen, allowing you to make the most of your fire. Radius Corner Hinges ensure a smooth finish and a tight fitting design to add sophisticated elegance to any fireplace.