WHITE-RODGERS 10166 Hydronic Controls - Fast Response Direct Immersion Controls

SPDT FAST RESPONSE HIGH-LOW LIMIT IMMERSION CONTRO

WHITE-RODGERS 10166 Hydronic Controls - Fast Response Direct Immersion Controls. Providing precise control in combination with dependable durability and dependability, WHITE-RODGERS 10166 is a great solution for many residential and light commercial hydronic applications.

This switch controls water flow in hydronic heating systems. It features a fast response time and is designed for use in hydronic heating systems. The white-Rodgers 10166 Hydronic Controls - Fast Response Direct Immersion Controls control the flow of hot water to heat exchangers and provide two stages of protection against over temperature and under temperature conditions.

WHITE-RODGERS 10166 Hydronic Controls - Fast Response Direct Immersion Controls, Momentary Pushbutton, Thermal-Magnetic Overload Protection, SPDT.

WHITE-RODGERS 10166 Hydronic Controls - Fast Response Direct Immersion Controls – Ideal for the homeowner who needs both high and low temperature control options. These controls are recommended for gas and oil furnaces, boilers, water heaters and radiant heating systems.

WHITE-RODGERS 10166 Hydronic Controls - Fast Response Direct Immersion Controls.

The White-Rodgers 10166 direct immersion controls provide a fast response time, while maintaining high safety levels. With the unique “high” limit feature, the controls will not energize until the thermostat temperature has been reached. The push button on/off switch provides for local control, even when the system is fully off. The built-in Power Failure Transfer Switch allows the boiler to continue operating for up to 6 hours in case of power failure.

WHITE-RODGERS 10166 Hydronic Controls - Fast Response Direct Immersion Controls. WHITE-RODGERS 10166 is a SPDT fast response, high-low limit immersion controls. This is a direct acting, two element control with one normally open (NO) and one normally closed (NC) output terminal. It features a 0 to 5 psi adjustable set point adjustment on the low temperature control, plus an external adjustment screw. The minimum differential required across the contacts for the limits to close is 2 psi, with less than .05% hysteresis.

The 10166 is a white-Rodgers direct immersion control that is 2-wire with ground. It is in the Hydronic pressure controls category and it has a response time of Fast Response. The control has an actuator output, size of 3/8" and a minimum differential of 0.5 PSI. This device has been used on Dehumidifiers, Air conditioners, Electric baseboard heaters. It has been used in Commercial applications and in Single Stage Furnaces.