ICM Controls ICM6500 120/240V AIR HANDLING CONTROL

120/240V AIR HANDLING CONTROL

ICM makes high quality, affordable air handling controls. Designed for comfort, safety and energy savings in mind. The ICM6500 is a 120/240V control that controls exhaust fans on commercial heating and cooling systems with capacities up to 5 tons.

The ICM6500 Air Handling Control is a stand-alone controller which can be used for up to six hot-water electrostatic precipitators with electrically powered exhaust fans, including the ICM6100 and ICM6200 Series. The ICM6500 has been designed to provide maximum flexibility in setup options for today's air pollution control systems and other similar applications.

The ICM6500 is a digital, pneumatic, air handling control designed to blend comfort, energy savings and cost efficiency. The control solution includes an inverter driven compressor, variable speed scroll motor blower, wireless remote control for individual room or general purpose metering and monitoring, and a supervisory controller for rapid diagnosis of faults.

The ICM6500 is a 120/240V direct digital control with transmitter, receiver and wiring hardware for installing indirect heaters in residential and light commercial applications. It offers advanced capabilities such as a graphical LCD panel and programmable set point. Also includes instant start, hold down and Sabbath programs.

The ICM6500 controller is a microprocessor-based, solid state control designed for use with single and multi-stage continuous flow split system air handling units rated up to 50HP. Features include fully microprocessor-based intelligent control that uses analog sensing, combining motion and pressure flow to compute flow rate which is used in the control algorithm; variable frequency drive output that provides precise control, reduced start-up and shut-down times, and energy savings; display adjustable in 0.1 Hz increments to indicate and fine tune speeds from .1Hz to 40Hz; direct single stage or multi-stage capability from 1 to

The ICM6500 is ideal for use in such applications as hospitals, schools, factories, indoor swimming pools, and other air-handling or industrial heating/cooling systems.

The ICM 65xx is a microprocessor-based control that provides up to three stage heating, two stage cooling and humidity control on a single chiller. It converts air flow and return water temperature into cooling capacity. The heat transfer properties of the chillers, installed in heat pumps or climatic zones, are fully adjustable for indoor and outdoor conditions.