WHITE-RODGERS 1311-102 1311-102 3/4" 24V 3-WIRE ZONE VALVE 2-WAY WI

3/4" 24V 3-WIRE ZONE VALVE 2-WAY WI

White-Rodgers 1311-102 3/4" 24V 3-Wire Zone Valve 2-Way WI

White-Rodgers 3/4" 24V 3-Wire Zone Valve 2-Way Wiring Diagram.pdf

White-Rodgers 1311-102 3/4" 24V 3-Wire Zone Valve - 2-Way Wiring Model 1311-102. Three (3) wires are required for this control, two (2) wires for the common and one (1) wire for the normally closed contact. This control may be ordered with any one of the following wiring configurations: Type 1 or None (No Common Wire/No Normally Closed).

Function - 24 Volt 3-Wire Zone Valve 2-Way Wiring Voltage (VAC) = 24 Valve Type = Normally Open (N/O) Enclosure Type = NEMA 4X Chassis MountedCable Length = 10 ft. Leadwire Configuration = Yellow Jacket / 3 Conductor

WHITE-RODGERS 1311-102 24-volt Zone Valve Control, Panel Mount 2-Way, 3/4" MPT x MNPT, No Trim Kit

The 1311-102 level valve is a permanently lubricated 24 volt, three wire zone valve. It has a two-way solenoid coil actuated by a low voltage 24 volt supply. One or both of the supply wires is common to run for all valves on the system. The normally closed supply applies power to the normally open terminal on the upper contact block. Commissioning and Testing Information Zone valve functionality can only be guaranteed when used with complete control and sensing systems.

The 1311-102 Zone Valve is an economical 24V two-way water valve.