Honeywell 10365 , Inc. Factory Set Proof of Closure Switch

ProofOfClosureSwitchV4055/4062

Proof of Closure Switch V4055 and 4062  is intended for various applications such as drip irrigation, water pumping, level control of liquid media. Built over many years of experience in the industry, Proof of Closure concept has proven its worth in thousands of field applications which includes irrigation, de-watering, soil and water conservation systems, high rise buildings and work facilities. This switch is user friendly with no need for any adjustments or installation in the pipeline. The switch works on the

This Factory Set Proof of Closure Switch is designed to operate in any system fitted with a Honeywell Level Controller, which includes the V4055 and V4062 Ultrasonic products, it can also be set up as a back-up in any system using different controllers. The switch is factory pre-set to trip once in five minutes and the ultrasonic detection device must be alcontralled by it.

The Product is a factory set proof of closure switch. The Honeywell Factory Set Proof of Closure Switch V4062 requires the installation of the Honeywell 10365V4055 as a general purpose push to trip switch with both normally open / normally closed contacts. This switch is designed to end an electrical circuit automatically when the device that activated the switch loses power.

The Honeywell 10365 is a Factory Set Proof of Closure Switch for V4055 and V4062 Atomizing Steam Turbines, designed for use with turbine systems requiring pressure release devices. The switch provides plant control personnel with a safe means to open the turbine's exhaust system during plant shutdown.

Closure Switch Serial Numbers are located on the connection block mounting plate. Figure 1 shows the location and design of the serial number and proof of closure switch.

Our Honeywell 10365 Proof-of-Closure switch is a replacement part for the 10355 Proof of Closure switch that has been discontinued by Honeywell. The POC switch is an integral and important component of paper shredding systems, ensuring that the wastebasket is sealed before paper can be shredded. Keep your system in tip top operating condition with our affordable replacement switch. __

Honeywell Proof of Closure Switch. The Proof of Closure Switch (POCS) from Honeywell has been specifically designed for the security industry. The POCS is designed to detect when a door or lid is open, and provide a tamper-proof indication of closure or opening. This switch will rotate into 90° `open' or `closed' positions with force applied by any format sensor. The functions can be seen by viewing the LED indicators and clear window on the face of