WHITE-RODGERS 1A11-2 1A11-2 120/240/277V SPDT LIGHT DUTY FAN CO

120/240/277V SPDT LIGHT DUTY FAN CO

White-Rodgers 1A11-2 - light duty fan coil control, 120/240/277V SPST for single speed, double unplugged limit switches, PLT-123D field adjustable mechanical draft damper, and dual stage gas valve with visual signal design.

The 1A11-2 is a SPDT light duty Fan CO that operates as a 2-speed fan in heat mode.

The 1A11-2 is a SPDT fan speed controller which provides light-duty control for ceiling fans and similar loads that run on 120 V single phase or 240/277 V split phase power. This circuit is designed for use with ceiling fans that do not have variable speeds. The 1A11-2 features Normally Open (NO) changeover switches, which provide the familiar ON - OFF operation commonly found on household wall switches, to smoothly control the speed of your ceiling fan.

SPDT for Light Duty Fan Control

2 SPDT LIGHT DUTY Electronic foot switch for ON/OFF control or LTR ON and OFF output. Can be used with 24 VDC actuator. Stainless steel ST-51 terminal screws, pivot options up to 350°, 90° down bearing, single pole snap-in 45° detent, dry contact N.C., max run capacitor: 1 mfd.

1A11-2 1A11-2 (In 120/240/277V AC) When mounted in a non-metallic box and installed in accordance with national wiring and code conventions, the 1A11-2 meets the requirements for light duty pool area exhaust fan control. Its mechanical latching override switch provides manual control of unit operation when necessary such as during service or fan motor replacement. The unit also has two optional auxiliary switches, one to monitor light levels (and therefore the need for ventilation), and a second to operate other equipment such as an air scrubber at required intervals. A manually adjustable time delay

This Fan coil has an NEMA 1 Indoor enclosure, 1 Current Draw- 0.35A @ 120VAC, 2 Terminal Configuration- 2+/2-, 3 Range of Maximum Continuous Current- 0.2A to 0.6A @ 120VAC, and is suitable for operation on Systems from 100/120/200/220/230VAC to 277VAC.