MCDONNELL & MILLER 247-2 247-2 MECHANICAL WATER FEEDER W/#2 SWITCH

MECHANICAL WATER FEEDER W/#2 SWITCH

Lightweight and reliable, the 247-2 is an ideal choice for your home or office. It offers a compact design that fits in most spaces and installation is easy – simply attach the feeder to an existing hose bib. The #2 Switch adds convenience by allowing you to control water flow from two different locations.

The 247 Feeder Switch is a mechanical water feeder switch with 1 inch male thread inlet and outlet and fits 2-1/2 inch pipe.

The 247-2 is a 24-volt mechanical water feeder. It comes with a #2 switch, does not require a controller and has an adjustable flow control to adjust the maximum flow rate from 1.3 to 4.3 GPM and will run continuously for 30 minutes at maximum flow rate.

The Model 247-2 is a Mechanical Water Feeder with # 2 Switch, which delivers a constant flow of water to roof top hydrants up to 200 gallons per hour.

MCDONNELL & MILLER 247-2 247-2 MECHANICAL WATER FEEDER W/#2 SWITCH, 3/8" SIZE, MINIMUM OF 50 FEEDERS NEEDED.

247-2 247-2 MECHANICAL WATER FEEDER W/#2 SWITCH

#2 switch is used to activate a downstream mechanical water feeder. The #2 switch is normally closed unless the handle of the feeder is in the off position, then the #2 switch falls off. The contacts of the switch are rated for 200 amps at 100 volts.

The 247-2 feeder is the most basic of all the MetroPac water feeders. This feeder is designed to mount on the wall and allow a steady stream of water at any time. You simply turn on the faucet, and this feeder will supply enough pressure to give you a steady stream of water. With its 2-switch system, this is an ideal feeder for outdoor watering systems or buildings that only require one switch. The switch itself has been tested to last over 100,000 cycles without failing. This means you can use this unit for many years without having to worry about it breaking down on you.

The 247-2 Mechanical Water Feeder is a low-maintenance feeder perfect for an outdoor environment. The rugged machined cast iron body is designed to withstand the harshest environments while being UV protected to prevent fading or staining. Its solid state construction minimizes the chances of water leaks and corrosion, while its non-corrosive, galvanized steel liner eliminates the risk of rusting and premature wear. Because this feeder features a #2 type switch, it will shut off automatically when it reaches its full capacity.

· Used in most fire sprinkler systems as a manual water feeder