Honeywell R4243B1053 2 POLE-30A-277V
2 POLE-30A-277V- Power R4243B1053 2 POLE-30A-277VThe Honeywell R4243B1053 2 POLE-30A-277V is a Safety Standard UL Listed for Outdoor Wet & Dry Location Damp or Wet Location Applications.Honeywell...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account3 POLE-30A-LESS COIL
The R8212G1217 is a 3 Pole/30 Amp/ 120V / 15 Amp Thermostat. Wiring and installation instructions are included with your thermostat. The convenient design of this product allows you to install it on the wall to keep it away from drafts and other problems that could affect its operation.
This 5.9 cubic foot 3 Pole, 30 Amp RHEEM/RHEEM-STABILUS electric water heater has a 21.0 gallons per minute flow rate, a 180,000 BTU evaporation rating and a 2 Year Limited Warranty. The R8212G is designed to provide efficient, dependable and economical water heating performance for commercial applications. This heater includes a patented stainless steel heat exchanger design, which ensures the duct system remains clear of contaminants. This model is a compact heat pump designed for use in residential applications that require less than 30 amps of reactive (reactive demand) load
The R8212G1217 3 Pole 30 Amp Occupancy Sensor Switch has been discontinued by the manufacturer. The below information and any related spec sheets can no longer be found on the Honeywell Web site.
The R8212G1217 is a 3 Pole, 30 Amp, 120/240 Volt, 240 Vac Normally Closed (N.C.) circuit Breaker with Current Limit (Honeywell True-Time No-Lite).
The Honeywell R8212G1038 is a programmable 3-pole, single-stage, 30a AC Industrial Control Circuit Breaker designed to protect 120/208Y/240VAC and 277/480/600VAC motors and loads. The current limiting function allows protection of motors at start-up and during operation.
For use with 3-wire, round-frame, conduit box only
The R8212G is a three-phase electric water heater with a galvanized-steel tank, designed for two to four bathrooms up to 30 Amps per heating element. Energy efficient, this unit offers all the features you need on a small bathroom water heater including an Analog control with LCD display and plenty of user-friendly instructions.