WHITE-RODGERS 108768 White-Rodgers UNIVERSAL GAS VALVE 3/4x3/4inch WITH REDUCER BUSHINGS (3/4inch TO 1/2inch)

24V 3/4" X 3/4" UNIVERSAL COMBINATI

EASY TO INSTALL ECONOMICAL TO OPERATE AND MAINTAIN Combination Gas Valve includes a 24V 3/4" X 3/4" universal combination gas valve with 1/2" pipe connections. This combination gas valve is intended for installation with boilers rated higher than 30,000 Btu. The Universal Gas Valve utilizes a heavy duty solid state design with O-Ring Seal Technology and has a large, easy-to-read dial. Technical Specifications: Overall Length:

24-volt, 3/4" X 3/4" Universal Combination Valve with factory installed reducer bushings (3/4" to 1/2") for use with Round Convector Coils, and Tubular Heat Exchangers with adapters provided. Made from brass and bronze materials the EAC series can be used in Residential, Commercial and Industrial applications. It's certified CGA-205 for Natural Gas and Certified CGA-240 for Propane.

WHITE-RODGERS 108768 WHITE-RODGERS UNIVERSAL GAS VALVE 3/4X3/4INCH WITH REDUCER BUSHINGS (3/4INCH TO 1/2INCH) 24V 3/4 X 3/4 U.

WHITE-RODGERS 108768 WHITE-RODGERS UNIVERSAL 3/4" X 3/4" GAS VALVE BODY Complete with LARGE REDUCER bushings

This Universal gas valve is not only sleek in design but also solid in quality. The 3/4" X 3/4" valve comes standard on most natural gas heaters up to 4500 FPM. The 108768 has an adjustable pilot, and tension spring to allow for quick and easy flame adjustment. The valve can be mounted horizontally or vertically and locks into place. This gas valve also features shut off elements as well as a manual pilot with ignition control.

This universal gas valve, with 7/4"-18 NPT male and 3/4" female connections, is designed to operate gas equipment with a 24V pilot. The valves include a stainless steel flexible diaphragm and brass poppet seat. The heavy duty white thermoplastic handle permits 10°-15° of articulation in either direction. A reduced diameter PVC sleeve or bushing should be installed on the 3/4" female side of this valve when connected directly to #

This universal 3/4 inch x 3/4 inch valve is designed for use with natural, propane, liquid petroleum and synthetic fuels. It has a brass body with an insulated white finish and contains integral, low profile ball-type check assemblies that replace the need for spring loaded poppet check valves. This allows use with different fuels without compromising correct operation. It includes a built-in brass flow control for regulating the rate of fuel flow if needed. It is in stock and ready to ship