WEIL 208979 383-500-300 RETURN/SUPPLY ULTRA S2 TEMERATURE SENSOR KIT -MCLAIN -MCLAIN 818525

383-500-300 RETURN/SUPPLY ULTRA S2 TEMERATURE SENSOR KIT WEIL-MCLAIN

383-500-300 RETURN/SUPPLY ULTRA S2 TEMERATURE SENSOR KIT WEIL-MCLAIN _____________________________________________________________________________________________________________ WEIL RETURN/SUPPLY ULTRA S2 TEMERATURE SENSOR KIT. WEIL ULTRA S2 BLUE CV 818525. Includes (30) 5 Pin Connectors, Push Lock Connectors, 1/4" Liquid Port Connector.. MCLAIN 383

The Weil McLain 208979 is a 383-500-300 RETURN/SUPPLY ULTRA S2 TEMERATURE SENSOR KIT that is designed to connect with a single-family residential gas heaters. It is easy to install and operates via the temperature switch. This item has dimensions of 5.75" Height x 2.13" Length x 4.63" Width and it weighs approximately 1 lbs. * Certificate of Inspection * Periodically Check Le

The 383-500-300 is a Return/Supply Ultra S2 Temperature Sensor Kit. It is used on return and supply air temperature sensor applications. This sensor has no wiring. Attachment methods include mounting. The maximum temperature for this sensor has been preprogrammed at the factory to 186 degrees Fahrenheit. It can be field adjusted up to 212 degrees Fahrenheit when necessary with the Hooker Model 3881RP1 Temperature Adjusting Tool (3/16` Hex head).

The MCLAIN 818525 return/supply ultra-S2 temperature sensor kit includes 1/4in NPT and 1/8in NPT temperature sensors, stainless steel saddles, and 7ft pigtail extension wire. NOTE: Kit materials are FDA Compliant

The West 818525 return/supply ultraS2 temperature sensor kitis designed to monitor the temperature of your hotwater or steam heating system. The kit includes an advanced electronic temperature sensor which monitors the return line only, a clear tip to protect against scalding, and a preassembled bulkhead connector.

The WEIL RETURN/SUPPLY ULTRA, S2 temperature sensor is a stainless steel thermostat-controlled electric heater that transfers heat to the surface of liquids for heating or chilling. It's accurate and consistent temperature control eliminates problematic variable heat settings. The sensor is designed for installation in equipment where it can be easily monitored such as plastic tanks, heat exchangers, mixers, etc.

The 383-500-300 sensor kit allows the user to remotely sense temperature and voltage in a wetted or isolated environment. The sensor is resistive, and is fully submersible in water or other liquids. It has a maximum reading range of 500 feet (151.4 m) and accuracy of ± 0.25% FS (minimum). With a spool length of 600 feet (182.9 m), this sensor will allow you to run several probes at the same time, so it