WHITE-RODGERS 5107 Thermostats Manual Reset Cut-in 160FOut Open on Rise.

LIMIT CONTROL MANUAL RESET 160F

The WHITE-RODGERS 5107 Thermostats Manual Reset Cut-in 160F Out Open on Rise Limit Control, is a mechanical limit control. Used in water heater applications and is used to prevent overfilling by shutting off the water supply when the water has reached a specified temperature, typically 160 degrees Fahrenheit. In addition it allows hot water to flow when the demand exceeds that which can be supplied by the hot water tank.

White-Rodgers 5107 thermostats have a manual reset on the limit control. This is a 3-position switch that is either on, off, or manual. The manual position allows the installer to use a screwdriver to quickly reset the limit control in case of an overshoot situation. The cut-in and cutout settings will have no effect while the switch is in this mode. Since this is a 3-position switch and not a 2-position one it will respond differently than a standard 2 position thermostat (i.e.

White-Rodgers 5107 Thermostats Manual Reset Cut-in 160F Out Open on Rise. The White-Rodgers name has been synonymous with quality and innovation since 1874, and that tradition of excellence continues today. Combining the know-how, experience and resources of a 125 year old company with the most advanced technologies, our products and systems make life at home easier and more comfortable for you, your family, and friends.

Thermostat Manual Reset, Cut In & Cut Out 160F, White-Rodgers, 5107

The White-Rodgers 5107 Thermostat is an 8-Pin Limit Control Thermostat used to control the heating and cooling process devices in a central heating and air conditioning system. This thermostat has a manual reset feature that allows it to be easily changed from automatic to manual modes. The product can be installed as part of an HVAC (Heating, Ventilation, and Air Conditioning) system in a residential or commercial building.

MANUAL RESET

The White-Rodgers 5107 Thermostat is a LIMIT CONTROL MANUAL RESET 160F. This thermostat will not cycle off if the temperature reaches the programmed set point.

This thermostat product includes a manual switch for resetting the limit control. This thermostat is commonly used in Type B installations, but may be used in other applications. The heat anticipator is factory set at 2 hours. There are two terminal blocks on the back of the thermostat for wiring connection to 4-wire systems.

WHITE-RODGERS 5107 THERMOSTAT MANUAL RESET CUT IN 160FOut CLOSE ON RISE.

This manual reset and limit control thermostat type 5107 is a combination of a zone control device, an outdoor air temperature sensor, and an indoor air sensor. The thermostat combines these features in one unit allowing for the installation of the OUTDOOR AIR TEMPERATURE SENSOR in place of the sensor supplied with the system. This thermostat features manual reset and a factory-equipped LIMIT CONTROL that resets when it senses indoor air temperature at 80°F.