3M 142-FT-30 QUALITATIVE FIT TEST APPARATUS

QUALITATIVE FIT TEST APPARATUS

The 3M 142-FT-30 qualitative fit test apparatus is designed for use with a variety of passive respirators and particulate respirators. This three part apparatus consists of a nose cup assembly, a sealing enclosure and a filter bridge assembly used to leak the containment atmosphere into a sealed chamber. Below are descriptions that focus on features created from benefits:

This 142-ft-30 qualitative fit test apparatus can be utilized as a stand alone unit or as part of the 3M 6000 series of portable respirator fit test systems. It is designed for testing respirators in service with tight-fitting facepieces that require qualitative fit testing. These are commonly used in industries with little to no process chemicals (for example food, automotive).

The 3M™ Portable Qualitative Fit Testing (QNFT) Apparatus is a kit designed to perform qualitative fit testing using 3M™ half-mask respirators (type N95, N99 or P100 particulate filters) for the presence of organic vapors, chlorine, hydrogen cyanide gas and propylene oxide. This kit allows technicians to conduct a wide range of qualitative fit tests with minimum effort and cost, and can be easily transported to the specific location where the screening is required.

Air supply manifold assembly is a locating device that mounts onto the quantitative fit tester (QFT) and provides an air source to the mask. This device can be installed on any QFT.

The 3M™ 142-FT-30 Fit Tester is a qualitative fit test instrument for simple size measurement of respirators and cartridges when being fitted to a user.

The 3M Fit Testing Apparatus (Model No. 142-FT-30) is a portable, battery-powered tester designed for people with no or low vision to perform qualitative fit testing by themselves. The apparatus allows the technician to present a variety of respiratory protection devices in a simulated industrial environment. A mechanical spacer is used in conjunction with nose plugs, or respirators without nosepieces, to simulate breathing through an industrial protective mask.

A Fit Test Apparatus for Testing the Fit of a Gas Mask to a Person's Face with an Air-Powered Pump.